Specifications

INFORMATION CENTER (GAUGE)
Fuel Consumption
The FUEL CONSUMPTION function
is to display the watercrafts fuel con-
sumption in four different ways. Refer
to
NUMERICAL DISPLAY .
VTS Mode
TheVTSMODEfunctionisusedto
manually set the VTS or change VTS
PRESET settings. Refer to
HOW TO
USE THE VARIABLE TRIM SYSTEM
(VTS)
in OPERATING INSTRUCTIONS .
Driving
The DRIVING function can be used
for activating or deactivating SPORT
mode of throttle control. Refer to
THROTTLE LEVER .
Display
The DISPLAY function is used to
change the indication in the numeri-
cal display of the information center.
Refer to
NUMERICAL DISPLAY .
Fault Codes
The FAULT CODES function is used
to display active fault codes. Refer to
MONITORING SYSTEM section.
Key Mode
The KEY MODE function is used for
changing LEARNING or RENTAL
key settings. Refer to
D.E.S.S.
POST (EMERGENCY ENGINE STOP
SWITCH)
.
Settings
The SETTINGS function is used for
changing the clock setting, dock mode
function setting, or for activating iBR
override. Refer to:
–
NUMERICAL DISPLAY for changing
clock setting
–
iS (INTELLIGENT SUSPENSION)
OPERATION
for dock mode func-
tion setting
–
JET PUMP, NOZZLE AND IBR GATE
in MAINTENANCE PROCEDURES
for activating the iBR override func-
tion.
10) Depth Sounder
Indicator
GTX Limited iS Model
The NUMERICAL DISPLAY canbese-
lected to provide an indication of the
lake water depth.
The system is capableof indicatingwa-
ter depth under the hull in single incre-
ments up to 50 m (164 ft).
NOTE: Under certain conditions, the
digitalscreen may stop displaying. The
digital screen's ability to display the
depth depends on the conditions of
use.
To activate depth indication, refer to
NUMERICAL DISPLAY in this subsec-
tion.
1
2
smo2009-002-114_r
1. Depth finder indicator
2. Water depth indication
NOTE: The DEPTH sounder indicator
is only on when a depth sounder is in-
stalled and detected.
WARNING
Never use the depth sounder as a
warning device to ride in shallow
water.
_______________
69