Specifications

INFORMATION CENTER (GAUGE)
WARNING
Selecting various numerical dis-
plays, system modes of opera-
tion or changing settings should
only be carried out with the water-
craft stopped. Selecting these var-
ious functions while operating the
watercraft at speed is not recom-
mended as it deters your attention
from situational awareness.
smo2009-002-114_o
MULTIFUNCTION DISPLAY - COMPASS
HEADING INDICATION
NOTE: To change the unit of measure-
ment or the language displayed, see
your authorized Sea-Doo dealer.
Selecting Functions
When operating at speed, the multi-
function display normally provides an
indication of the compass direction and
azimuth the watercraft is traveling.
To select the various functions avail-
able through the multifunction display,
press the MODE button repeatedly un-
til the desired function is visible:
–LAPTIME
– SKI MODE (WAKE PRO)
– LAP TIME (RXT-X)
– FUEL CONSUMPTION
–VTSMODE
–DRIVING
– DISPLAY
– FAULT CODES
– KEY MODE
– SETTINGS.
Then pressthe SET buttonto enter that
function.
NOTE: The fault code function is only
available when there is an active fault.
The settings function is only available
when the engine is shut off.
Function Description
Lap Timer
Thelaptimercanbeusedtorecordup
to 50 individual lap times.
To activate and use the lap timer, carry
out the following:
1. Press the MODE button repeatedly
until LAP TIME is visible in the multi-
function display.
smo2010-002-111
FUNCTION SELECTED - LAP TIME
2. Press the SET button to enter the
function, the lap timer will be acti-
vated and visible in the display.
_______________
67