Specifications
INFORMATION CENTER (GAUGE)
4. Press the UP or DOWN arrow but-
ton to adjust the clock to the correct
local time.
5. Press the SET button to save the
setting and return to the main dis-
play.
NOTE: The clock uses the GPS sig-
nal to maintain the appropriate time
referenced to Greenwich Mean Time
(GMT). When setting the clock, only
the hour indication may be changed.
Select Fuel Consumption Display
The approximate watercraft fuel con-
sumption may be displayed in the nu-
merical display 4 different ways:
– Instant fuel flow per hour (gal/h or
l/h)
– Average fuel flow per hour (gal/h or
l/h)
– Distancetoempty(MiorKm)
– Timetoempty(hormin).
To view the watercraft fuel consump-
tion, carry out the following:
1. Press the MODE button repeatedly
until the FUEL CONSUMPTION is
visible in the multifunction display.
smo2010-002-109
FUNCTION SELECTED - FUEL
CONSUMPTION
2. Press the UP or DOWN arrow but-
ton to select the desired fue
lcon-
sumption display mode.
l/h
smo2010-002-110
FUEL CONSUMPTION DISPLAY MODE -
INSTANT FUEL FLOW
3. Press the SET button to save the
setting and return to the main dis-
play.
NOTE: The fuel consumption value
will be displayed in the numerical dis-
play. Double click the SET button to
reset the average fuel consumption in-
dication. The display will momentarily
indicate zero (0).
9) Multifunction Display
When the electrical system is pow-
ered up and the cluster has completed
itsselftestfunction,aWELCOME
ABOARD SEA-DOO scrolling mes-
sage will appear for a few seconds.
After the welcome message, nothing
will appear in the display until the wa-
tercraft is operated.
When the watercraft is being oper-
ated, the multifunction display pro-
vides an indication of compass head-
ing, scrolling messages from the mon-
itoring system, or a scrolling DOCK
MODE ON message when the func-
tion is active.
The multifunction display is also used
to display a menu for the selection of
various functions which, permit
chang-
ing the numerical display indication,
system modes of operation, settings,
active system fault codes,
and a lap
timer.
66
______________