Specifications

INFORMATION CENTER (GAUGE)
The information center is a cluster of
gauges, indicator lights and a digital
screen to display operational informa-
tion to the operator.
The text message can be displayed in
different languages and the units of
measurement can be displayed in met-
ric or imperial units. See an authorized
Sea-Dootohavetheinformationcen-
ter set to the unit of measurement and
available language of your choice.
It allows the operator to view at a
glance several indications such as
speed, engine RPM, fuel level and en-
gine temperature. The gauge can also
be used to navigate through and select
several functions, modes of operation
and change certain settings and sys-
tem parameters.
Indicator lamps advise the operator of
selected functions or malfunctions.
The gauge incorporates a GPS (global
positioning system) that it uses for the
altitude, compass, and speedometer
indications, and to provide signals to
other systems as required for their op-
eration.
An information center self test can
be initiated by pressing the start/stop
button (without the D.E.S.S. key in-
stalled). All LCD segments and indica-
tor lights will turn on for approximately
3 seconds. The analog speedometer
and RPM indications will also cycle
through their full scale of operation.
This allows the operator to validate
that all indicators are working properly.
Should a fault be detected during the
self-test function, an error message
will be displayed, an indicator light may
come on, and an audible signal (beep
code) may be heard to signal that a
fault has been detected.
A fault code can be generated and
memorized to assist your authorized
Sea-Doo dealer in troubleshooting the
faulty system. Refer to
FAULT CODE
DISPLAY
in this section for instructions
on how to display fault codes.
WARNING
Watching or using the functions
available through the information
center can distract from the opera-
tion of the watercraft, particularly
from constantly scanning the en-
vironment. Always ensure your
environment is clear and free from
obstacles or persons in the water,
and bring the watercraft to a low
speed before using any functions
in the information center.
NOTE: Some indications, functions
and features described in this section
may not apply to every PWC model,
or may be available as an option. See
your authorized Sea-Doo dealer for in-
formation on available options for your
PWC.
_______________
59