Specifications

CONTROLS
smo2009-002-114_c
EXAMPLE - LEARNING KEY SET TO 1
NOTE: Pressing the SET button twice
will enable the Rental key setting func-
tion. The display will change to R-Key.
smo2009-002-114_cc
EXAMPLE - RENTAL KEY SET TO 5
5. Press the UP or DOWN arrow but-
ton to toggle the key setting be-
tween 1 and 5. See table for speed
limitations according to setting.
6. Press the SET button once to save
the setting, twice to exit the func-
tion,orsimplywaitforthefunctio
n
to time-out. The change in key set-
ting will automatically be saved.
NOTE: The key speed setting is appli-
cable to any key of the same type used
on a specific watercraft. The sam
e
key type used on a different watercraft
may therefore have a different key
speed setting.
D.E.S.S.
KEY TYPE
KEY
SPEED
SETTING
APPROX.
MAX.
SPEED
5
58 km/h
(36 MPH)
4
55 km/h
(34 MPH)
3
50 km/h
(31 MPH)
2
47 km/h
(29 MPH)
Learning
key
1
42 km/h
(26 MPH)
5
74 km/h
(46 MPH)
4
69 km/h
(43 MPH)
3
63 km/h
(39 MPH)
2
58 km/h
(36 MPH)
Rental key
1
51 km/h
(32 MPH)
5) Engine Start/Stop
Button
The engine start/stop button is located
on the LH handlebar. It is used to wake
up the electrical system as well as to
start and stop the engine.
sdd2009-001-019_a
TYPICAL
1. D.E.S.S. post
2. Start/stop button
52
______________