Specifications

CONTROLS
smo2009-002-114_a
NORMAL KEY RECOGNIZED
The SEA-DOO learning key or the
rental key, limits the speed of the wa-
tercraft and the engine torque, there-
fore enabling first time users and less
experienced operators to learn how to
operate the watercraft while gaining
the necessary confidence and control.
smo2009-002-114_aa
LEARNING KEY RECOGNIZED
NOTE: Any key may be programmed
to more than one watercraft. In fact,
the watercraft is programmed to rec-
ognize the key.
Changing Learning or Rental Key
Speed Settings
Both the rental and learning keys each
offer five speed limitation settings with
the slowest at setting 1 increasing
to setting number 5. By default,
the
learning key and rental key are preset
to the highest speed setting (5).
NOTE: Changing key settings is only
available when the engine is not run-
ning.
To change learning or rental key set-
tings, carry out the following:
1. Press the start/stop button to wake
up the electrical system and install
the NORMAL key on the D.E.S.S.
post.
2. Wait for the information center to
complete its self-test and display
the key recognition message.
3. Press the MODE button repeatedly
until KEY MODE is visible in the digi-
tal screen of the information center.
sdd2009-001-024_b
TYPICAL - GAUGE CONTROL BUTTONS
1. MODE button
2. SET button
3. UPDOWN arrow button
smo2009-002-114_b
FUNCTION SELECTED - KEY MODE
4. Press the SET button once to enable
learning key mode setting func
tion.
The display will change to L-Key.
_______________
51