Specifications

CONTROLS
To perform this adjustment, pull on the
release handle at the base of the steer-
ing column just ahead of the glove box,
and tilt the handlebars to the desired
position.
sdd2009-001-088_a
TYPICAL
1. Release handle
2. Available tilt adjustment
3. Multifunction gauge
When the handlebars are at the de-
sired position, release the latch handle
and ensure the latch pawl properly en-
gages a groove in the steering column.
Also ensure the latch handle is in the
forward position.
WARNING
To prevent sudden movement of
the steering column, always en-
surethepawlonthesteeringcol-
umn latch is properly engaged in
one of the grooves on the steering
column.
smo2009-002-116_a
STEERING COLUMN ADJUSTMENT LATCH
NOT SECURED
1. Latch pawl engaged in steering column
groove
2. Release handle unlocked
smo2009-002-117_a
STEERING COLUMN ADJUSTMENT LATCH
PROPERLY SECURED
1. Latch pawl engaged
2. Release handle locked forward
Ergonomic Adjustments
RXT-X Model
The handlebar width and angular posi-
tion of the controls may be adjusted to
driver preference by extending and ro-
tating the handlebar extension tubes.
NOTE: To carry out the ergonomic ad-
justments, see an authorized Sea-Doo
dealer.
_______________
43