Specifications

CONTROLS
3 6 7
8 2 1
5
10
9
4
smo2009-002-200_d
TYPICAL - IDENTIFICATION OF CONTROLS
1. Handlebar
2. Throttle lever
3. iBR lever (intelligent Brake and Re-
verse)
4. D.E.S.S. post
5. Engine start/stop button
6. VTS button (Variable Trim System)
7. iS button (intelligent Suspension)
8. MODE/SET button
9. UP/DOWN arrow button
10.Cruise button
NOTE: Some indications, functions
and features described in this
section
may not apply to every PWC model, or
may be available as an option.
1) Handlebar
The handlebar controls the direction of
the watercraft. During f
orward opera-
tion, turning the handlebar to the right
steers the watercraft to the right and
inversely.
However, when operating in reverse,
steering direction is reversed. Turning
the handlebar to the right while back-
ing up steers the watercraft to the left.
WARNING
Check handlebar and correspond-
ing steering nozzle operation be-
fore starting. Never turn handle-
bar while someone is near the rear
of the watercraft. Keep away from
steering moving parts (nozzle, iBR
gate, linkages etc.).
Tilt Adjustment
All Models
The handlebar position can be adjusted
to suit rider preferences.
The entire, handlebars, and steering
column tilts up or down as a unit.
42
______________