Specifications
PRE-RIDE INSPECTION
Storage Compartments, Boarding
Platform and Seat
Ensure all required safety and survival
equipment and any additional cargo is
properly stored in the storage bins pro-
vided.
Ensure the self-contained storage bin
cover, front cover, glove box, boarding
platform, access panels, and seat are
closed and latched.
WARNING
Ensure the seat, boarding plat-
form, access panels, and all stor-
age compartment covers are se-
curely latched.
RXTiS,GTXiSandGTXLimitediS
Models
Ensure there are no items of cargo, or
other material, between the moving
deck and fixed deck.
WARNING
Do not store cargo or material of
any type in the space between the
moving and fixed deck, or near
the rear suspension control arm.
These areas must remain free of all
obstructions to permit free move-
ment of the deck and any water
which may accumulate in the foot
wellareas. Useonlyprovidestor-
age compartments.
Wakeboard Rack
WAKE Pro Model
WARNING
Ensure wakeboard rack is properly
secured to watercraft body, and
that the wakeboard is properly po-
sitioned and secured to the rack
prior to using watercraft. Ensure
wakeboard retaining straps are in
good condition.
Ski/Wakeboard Post
WAKE Pro Model
Make sure ski/wakeboard post is fully
extended and locked before use.
Completely retract and lock when not
used.
WARNING
Use caution with skier/wake-
boarder in tow as tow rope may
backlash to watercraft when re-
leased. Never perform a sharp
turn when towing a skier, wake-
boarder or any toy.
NOTICE
The ski/wakeboard post is
designed for towing a skier or wake-
boarder with a maximum gross
weight of 114 kg (250 lb).
D.E.S.S. Post and Engine Start/Stop
Button
Press the start button once without
installing the lanyard on the D.E.S.S.
post. The informationcenter will come
ON, proceed through its self test func-
tion, and shut down all indications after
a few seconds.
Install the D.E.S.S. key (lanyard) on the
D.E.S.S. post (emergency engine stop
switch). The information center will
come back ON, cycle through it's self
test and stay on for approximately 3
minutes.
Press the start/stop button to start the
engine, then stop it by pressing the
start/stop button a second time.
Restart the engine, then stop it by re-
moving the lanyard from the D.E.S.S.
post.
38
_______
SAFETY I
NFORMATION
________