Specifications

PRE-RIDE INSPECTION
Hull
Inspect hull for cracks and other dam-
ages.
Jet Pump Water Intake
Remove weeds, shells, debris or any-
thing else that could restrict the flow of
water and damage the propulsion unit.
Clean as necessary. If any obstruction
cannot be removed, refer to an autho-
rized Sea-Doo dealer for servicing
F18J04Y
21
TYPICAL — INSPECT THESE AREAS
1. Water intake
2. Ride plate
Drain Plugs
Secure bilge drain plugs.
smo2009-002-135_a
TYPICAL
1. Bilge drain plugs
2. Tighten
3. Untighten
WARNING
Ensure bilge drain plugs are prop-
erly secured prior to launching the
watercraft in water.
Fuel Tank
Fill the fuel tank.
WARNING
Strictly adhere to instructions in
the
FUELING PROCEDURE .
Engine Compartment
Inspect the engine compartment for
fuel vapor odor.
WARNING
Should any leak or gasoline odor
be present, do not apply electrical
power or start the engine. Refer to
an authorized Sea-Doo dealer be-
fore use.
To access the engine compartment,
open the seat.
RXTiS,GTXiSandGTXLimitediS
Models
Also remove the ventilation box by de-
pressing the 3 locking tabs and lifting it
off the deck extension.
smo2009-002-002_b
1. Ventilation box
2. Locking tabs
36
_______
SAFETY I
NFORMATION
________