Specifications

PRE-RIDE INSPECTION
WARNING
Perform a pre-ride inspection before each ride to detect potential problems
during operation. The pre-ride inspection can help you monitor wear and
deterioration before they become a problem. Correct any problems that
you discover to reduce the risk of a breakdown or crash. See an authorized
Sea-Doo dealer as necessary.
Before performing the pre-ride inspection, read and understand the CONTROLS
section.
What to Do Before Launching the Watercraft
WARNING
Engine should be off and the D.E.S.S. key should always be removed from
its post prior to verifying any of the following points. Only start watercraft
once all items have been checked and operate properly.
Check the items listed in the following table before launching the watercraft.
ITEM OPERATION
✓
Hull Inspect.
Jet pump water intake Inspect/clean.
Drain plugs Tighten.
Fuel tank Refill.
Engine compartment Check for any fluid leaks and gasoline vapor odor.
Engine oil level Check/refill.
Engine coolant level Check/refill.
Steering system Check operation.
Throttle lever Check operation.
iBR lever Check operation.
Intelligent Suspension (iS) Check operation.
Front storage compartment cover,
boarding platform and seat
Ensure they are closed and latched.
Self-contained removable storage bin
Ensure it is installed on watercraft and properly closed
and latched.
Wakeboard rack
– Ensure rack is properly installed and secured.
– Make sure bungee cords are in good condition.
– Ensure wakeboard is correctly installed in rack and
secured.
Ski/wakeboard post Inspect and check operation.
D.E.S.S. post and engine start/stop button Check operation.
________
SAFETY INF
ORMATION
________
35