Specifications

MAINTENANCE PROCEDURES
Fuses
Fuse Removal and Installation
Use the fuse remover/installer in-
cluded in the fuse box to ease fuse
removal.
Fuse Inspection
If an electrical problem occurs, check
the fuses. If a fuse is burnt, replace by
one of the same rating.
A15E0KZ
1
2
3
TYPICAL
1. Fuse
2. Check if melted
3. Ampere rating
WARNING
Do not use a higher rated fuse
as this can cause severe dam-
age. If a fuse has burnt out, the
source of the malfunction should
be determined and corrected be-
fore restarting. See an authorized
Sea-Doo dealer for servicing.
Fuse Location
RXT-X, RXT 215, WAKE Pro 215
and GTX 155 Models
To access the fuse boxes, remove the
RH access panel on the rear boarding
platform. The fuse boxes are atta
ched
to the front of the battery holder.
RXT-iS, GTS iS and GTX Limited iS
Models
To access the fuse boxes, open the
boarding platform.
Remove the two plasticrivetssecuring
the RH aft storage bin and remove the
storage bin from the fixed deck. The
fuse boxes are located just under the
storage bin, attached to the front of the
battery holder.
smo2009-002-001_b
TYPICAL
1. Battery holder
2. Fuse box
3. Relay fuse box
To remove a fuse box cover, squeeze
locking tabs together, hold and pull
fuse box cover to open.
NOTE: Fuse ratings and positions are
illustrated on the fuse box cover.
______________
125