Specifications

MAINTENANCE SCHEDULE
FIRST 10 HOURS
25 HOURS or 3 MONTHS
50 HOURS or 6 MONTHS
100 HOURS or 1 YEAR
200 HOURS or 2 YEAR
A: Adjust
C: Clean
I: Inspect
L: Lubricate
R: Replace
O: Operator
D: Dealer
TO BE PERFORMED BY
PART/TASK NOTE
iBR SYSTEM (intelligent Brake and Reverse)
iBR lever
(3)
I, L O, D
(3) See NOTE 2 after
maintenance chart.
iBR gate backlash I I D
iBR support plates I I D
iBR friction sleeves I R D
iBR connecting arms, sleeves and bushings I I D
iBRUlever,VTStrimring,iBRgateand
bushings
IID
iBR locking sleeve I R D
iBR protective guard I I D
—
iS SYSTEM (intelligent Suspension)
iS oil
(7)
IID
iS position sensor I I
D
(7) Check pump reservoir oil
level and for system leaks.
HULL AND BODY
Hull I I O
Ride plate and water intake grate I I O
—
NOTE 1: The supercharger clutch requires replacement when the “MAINTE-
NANCE SUPERCHARGER” message is displayed in the information center, at
every 100 hours of operation or earlier depending on the riding style (speed,
engine RPM, water conditions). This is determined by the engine management
system. The supercharger clutch will need to be replaced within 5 hours of the
message display by an authorized Sea-Doo dealer. The supercharger mainte-
nance reminder must be reset using B.U.D.S. in order to reset the supercharger
maintenance hour counter, even if the maintenance was carried out before the
reminder appeared in the information center.
NOTE 2: The iTC and iBR levers should be inspected by depressing and releasing
the levers to check for freedom of movement. If any friction is felt, the lever
must be taken apart, cleaned, inspected for wear and lubricated by an authorized
Sea-Doo dealer.
______________
113