Specifications

OPERATING INSTRUCTIONS
1
smo2010-002-117_a
FIRST SETTING AVAILABLE - RAMP
1. RAMP setting
3. To change the RAMP selection,
press the UP or DOWN arrow but-
ton until the desired ramp mode
number is visible in the numerical
display.
4. Press SET to lock in the ramp set-
ting, the multifunction display will
switch to the TARGET SPEED set-
ting function.
1
smo2010-002-118
SECOND SETTING AVAILABLE - TARGET
SPEED
1. TARGET SPEED setting
5. Press the UP or DOWN arrow but-
ton to increase or decrease the tar-
get speed.
6. Press set to lock in the target speed,
the display will switch to the follow-
ing scrolling message SKI MODE -
PRESS_SET_TO START OR MODE
TO EXIT.
smo2010-002-119
SCROLLING MESSAGE - SKI
MODE_PRESS_SET_TO START OR
MODE TO EXIT
NOTE: A BEEP will be heard every 5
seconds as a SKI MODE engaged re-
minder.
7. Press SET again. The following con-
firmation message will appear SKI
MODE ACTIVE - RETURN TO IDLE
TO CANCEL.
smo2010-002-120
SCROLLING MESSAGE - SKI MODE
ACTIVE_PRESS_MODE_AND RETURN TO
IDLE TO CANCEL
NOTE: The SKI MODE indicator light
will also blink when ski mode becomes
active.
98
______________