Instruction manual

19 of 32

2. To display two signals in PAP (Picture And Picture) mode, on the remote control press PAP or on the Misc.

menu PIP Mode setting, select PAP.

The Swap button on the remote control swaps the PAP image source with the main image source.

Figure 12: PAP Window

3. To return to full screen viewing of the main image source last selected before entering PAP mode, with the

remote control select PIP a third time.

Primary Source and Secondary Source Selection

The table below shows the availability of PIP and PAP functions according to the primary source signal type.

Secondary Source

Primary Source

DVI-D DVI-A VGA HDMI Composite S-Video YPbPr RGB 3G-SDI

DVI-D ● ● ● ● ●

DVI-A ● ● ● ●

VGA ● ● ● ● ●

HDMI ● ● ● ● ● ●

Composite ● ● ● ● ● ● ●

S-Video ● ● ● ● ● ● ●

YPbPr ● ● ● ● ●

RGB ● ● ● ● ●

3G-SDI ● ● ● ● ● ●

Table 8: PIP and PIP Function Availability for Signal Type Combinations

Key:

● PIP function enabled

PAP