Use Guide

1. slow flash, ap hotspot mode,
Network indicator (red):
2, long light, the device is successfully connected to wifi
3. Fast flashing, device connection failed, wifi password input error
Note: When the camera working state is unknown, please reset
the camera to restore factory settings (press and hold the camera
reset button for more than 5 seconds), the camera reboot after
opening the AP mode, wif indicator slow flash (3 seconds flash
once).
2. Click "+" to add a device. Click "Device AP Network Configuration".
2. Click "Go to WiFi Configuration" to jump to the WIFI connection page and
select ("DGO****×", "DBG****", "HTM****×*","TUT****") WIFI hotspot and
connect.