User Guide

CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Do not draw on the desk surface directly. Use paper and crayons
when playing with the desk.
3. It is not recommended to draw on more than one spot on the desk
at the same time.
4. Remove the batteries when the unit is not in use for a long period
of time.
5. Do not drop the unit on hard surfaces.
6. Do not expose the unit to moisture or water.
7. Do not sit on the desk.
8. Do not use any sharp object to draw or write on the drawing surface
of the desk.
TROUBLESHOOTING
If the program stops working, please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If you find that the picture appearing on the LCD screen looks strange:
1. Make sure there is only one area of the desk being touched at any
time.
2. Check if you have put your other hand on the desk while drawing,
or if you are putting too much pressure from your wrist on the desk.
If you find that nothing appears on the LCD screen while you are
drawing:
1. Make sure you have put only one piece of paper onto the desk.
2. Make sure you are drawing on the piece of paper and using a
crayon.
3. Make sure you are applying enough pressure on the paper with
your crayon.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-800-267-7377 in Canada and a
service representative will be happy to help you.
16
Care & Maintenance / Troubleshooting