User's Manual

47
Answering system settings
Remote access code
A two-digit security code is required to access the answering
system remotely from any touch-tone telephone. The preset code
is 19. You can set the code from 00 to 99.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Remote code, then press SELECT.
Use the dialing keys (0-9) to enter a two-digit number,
or press or to scroll to a desired two-digit number.
Then press SELECT to confirm your selection. You hear a
confirmation tone.
Message alert tone
When the message alert tone is set to on, and there is at least one
new message, the telephone base beeps every 10 seconds.
To turn this feature on or off:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to Msg alert tone, then press SELECT.
Press or to choose Tone: On or Tone: Off, then
press SELECT to confirm your selection. You hear a
confirmation tone.
The answering system must be turned on for the message alert
tone to be functional.
Press any key on the telephone base (except FIND HANDSET)
to temporarily silence the message alert tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
•
•
Ans sys setup
ECO
Remote code
ECO
Remote code
19
ECO
Ans sys setup
ECO
Msg alert tone
ECO
Tone: Off
ECO