User's Manual

Telephone settings

Home area code

If you dial local calls using only seven digits (area code not required), you can

program your home area code so that when you receive a call within your local

area, the telephone number is automatically stored in the call log without the

area code.

To change the setting:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings,

then press MENU/SELECT.

Press CID or until the screen displays

Home area code, then press MENU/SELECT. The

screen displays the current stored home area code.

Use the dialing keys (0-9) to enter the desired home

area code.

Press MUTE/DELETE to delete a digit.

Press and hold MUTE/DELETE to delete all digits.

Press MENU/SELECT to conrm. You hear a conrmation tone.

Dial mode

The default dial mode is tone dialing. If you have pulse (rotary) service, you

need to change the dial mode to pulse dialing.

To change the setting:

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Settings, then press

MENU/SELECT.

Press CID or until the screen displays Dial mode, then press

MENU/SELECT.

Press CID or to choose Tone or Pulse, then press MENU/SELECT to

conrm your selection. You hear a conrmation tone.

Website

Use this feature to view the VTech website address.

Press MENU/SELECT when the handset is not in use.

Press CID or until the screen displays Website, then press

MENU/SELECT. The screen displays the VTech website address.

•

Home area code

___

If, in the future, your telephone service provider requires you to dial the area code

when making a local call, or, if you move to a location that requires it, delete the

home area code you have already programmed following the steps above. After

you have deleted the home area code, _ _ _ appears.