Battery Charger User Manual

2
GETTING STARTED
Installing the Rechargeable Battery Packs
1.MakesuretheInnoTab
®
3orInnoTab
®
3Sisturnedoff.
2.Turntheunitover.Slidethebatterydoorlockswitch(orswitches)forward
andpushthebatterycoversofftoeachsidetoremovethem.
3.Remove any old batteries that may be in the toy. (Battery removal and
replacementshouldbedonebyanadult.)
4.InsertBattery Pack① into the compartment on the right side and
Battery
Pack
② into the compartment on the left side.
 •Insertthebatterypackintotheconnectorslotfirst.
 •Thenpressthebatterypackdownuntilitrestsinplace.
5.Replacethebatterycovers.
InnoTab
®
3
InnoTab
®
3S
Charging and Recharging the Batteries
Therechargeablebatteriesshouldbefullychargedbeforethefirstuse.Tocharge
andrechargethebatteries,pleasefollowtheinstructionsbelow.
1.Makesurethebatterypacksareinstalledinthetablet.