Operating instructions

16
Enter Time:
*Using the scroll keys ( and ) select
the correct hour (1,2,3,...12). To confirm your
selection press the DEL key.
*Using the scroll keys ( and ) select
the correct minute (0,1,2,...59). To confirm
your selection press the DEL key.
*Using the scroll keys( and ) select
the either AM or PM. To confirm your selec-
tion press the DEL key.
Enter Month / Day:
*Using the scroll keys( and ) select
the correct number for the current month
(1,2,3,...12).To confirm your selection press
the DEL key.
*Using the scroll keys ( and ) select
the correct number for the current day
(1,2,3,...31). To confirm your selection press
the DEL key.
If you make a mistake during setup you
must restart the setup process. First,
do not press any keys on the unit for 30
seconds. After this time ,the unit will
default to the clock (standby) mode.
To re-enter the setup process,press and
hold both scroll keys ( and )
for 6 seconds.
You can now update the time and date
information. All stored CID records will be
retained.
If you want to perform a complete reset,
please see Manual Reset,page 17.
Reviewing Caller ID Information
All received calls are sequentially numbered
and stored in memory for later review. The
VT9121 has the capacity
to hold up to 99 Caller ID records
for review. If you have 99 calls stored
in memory and you receive another
call, the oldest call record is automatically
dropped from the record to make
room for the new Caller ID information.
When an incoming call occurs, the
base will automatically display the
Caller ID information. All unanswered
calls are considered new calls. The
unit keeps track of all new calls. The
NEW CALL icon is turned on, and
upon returning to clock mode ,the New Call
LED will begin to flash and the
number of new calls and total calls are dis-
played on the LCD.
For example, suppose you were not at home,
but had received 6 calls while you were out.
The NEW CALL icon would
be activated, the New Call LED would
begin to flash, and the LCD would
display the following message:
CALLER ID SETUP
REVIEWING CALLER ID INFORMATION