Operating instructions

12
BASIC TELEPHONE OPERATIONS
INTERCOM
(Conversation between the Base and Handset)
From the Handset: Press INTERCOM. The Base Unit will
ring, and the intercom call will be automatically connected.
From the Base: Press INTERCOM/PAGE. The Handset will
ring. To answer the call, press INTERCOM on the Handset.
To end an Intercom call, press OFF on either the Handset or
the Base.
VOICE MAIL INDICATOR
If you subscribe to Voice Mail, the MESSAGE light on the Base
Unit will flash when you have new messages. The Handset will
display:
Once you have reviewed your new messages, the MESSAGE WAITING indication on the
Handset, and the MESSAGE light on the Base will turn off.
VOICE MAIL TIPS:
After hearing your messages, wait until the Voice Mail
indicators turn off before you make another call. This will
ensure the indicators do not remain on after the mes-
sages are reviewed.
If, after reviewing all new voice messages, the Handset or Base Unit Voice Mail indicator
remains on, using the Handset, follow these steps:
• Press PROG.
• Press #. The Handset displays:
• With LIGHT-OFF flashing, press SELECT.
If you have new messages, but the Voice Mail indicators do not turn on, ask your phone
company to make sure your Voice Mail service has Visual Message Indication assigned.
IMPORTANT: If you move or change to a different telephone service provider, you should
reset your Visual Message waiting feature:
1. Press PROG on the Handset
2. Press #
3. Press so that RESET is blinking
4. Press SELECT.
SETTING THE HANDSET RINGER
• Press PROG.
• Press until RINGER is blinking
• Press SELECT.
• Press or to select LINE1 or LINE2.
• Press SELECT.
MIC
MESSAGE WAITING
LIGHT-OFF RESET
6
5
4
GHI
JKL
MNO
9
7
8
PQRS
TUV
PROG
CONF
HOLD
INTERCOM
FLASH
REDIAL/PAUSE
WXYZ
0
TONE
OPER
1
2
3
ABC
DEF
OFF
LINE 1 LINE 2
SELECT