User Guide

27
Remote Access Commands (continued)
Function: Command:
Record memo Press * 8 ; then mailbox number
whereyou want memo recorded; speak
after beep; press # 5 to exit.
End remote access call Press * 0 .
Turn system off Press # 0 ; the system announces,
“Machine off.” Press # 0 again to
turn the system back on.
Turn system on When system is off, it answers after 10
rings and announces, “Please enter your
remote access code.” Press # , then
enter your remote access code.
NOTE: The remote access call will automatically end if 20 seconds
go by with no key being pressed (other than when recording or playing
messages or announcements).
ANSWERING SYSTEM OPERATION
AT TOUCH TONE PHONE
Function: Command: