User Guide
16
4 When you finish entering the name, press
SELECT
or
PROG/CHAN
.The screen displays ENTER NUMBER.
5 Enter the telephone number. Use to backspace and make a
correction. Press
REDIAL/PAUSE
to store a pause in the dialing
sequence.
—OR—
Press
REDIAL/PAUSE
to display the last number dialed from this phone.
6 Press
SELECT
or
PROG/CHAN
. The screen displays
DISTINCT RING? and the current setting.
7 Press or to change the setting. Choose Y (for Yes) if you wish
the phone to alert you to calls from this number by changing to a
distinctive ringing pattern after the first ring. Choose N (for No)
for a normal ringing pattern.
8 Press
SELECT
or
PROG/CHAN
to confirm your selection. If you
chose Y in Step 7,a D will be displayed with the directory entry.
Note:
When memory is full the screen displays
MEMORY FULL
, an error
tone sounds, and you will not be able to store a new number until you delete a
stored number.
Edit a Number/Name Stored in the Directory
1 Press (DIR). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries
stored in memory
—OR—
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press
SELECT
. Then press or until EDIT flashes.
4 Press
SELECT
. The screen displays the name and number. The
flashing cursor appears at the end of the name. Use , and
the dial pad keys to edit the name. Press
SELECT
to move on to
edit the number. Press
SELECT
to move to edit the Distinctive
Ring setting.
5 Press
SELECT
to save the edited information.
TELEPHONE DIRECTORY
DIAL EDIT ERASE
973-555-0123
5/01 5:40PM OLD 28