User Guide
13
5 When you finish entering the name, press
SELECT
or
PGOG/CHAN.
The screen displays ENTER NUMBER.
6 Enter the telephone number. Use to backspace and make
a correction. Press r to store a pause in the dialing sequence.
—OR—
Press
REDIAL/PAUSE
to display the last number dialed from this phone.
7 Press
SELECT
or
PROG/CHAN
to store your entry. The screen
displays DISTINCT RING? and the current setting.
8 Press or to change the setting. Choose Y (for Yes) if you
wish the phone to alert you to calls from this number by changing to
a distinctive ringing pattern after the first ring. Choose N (for No)
for a normal ringing pattern.
9 Press
SELECT
or
PROG/CHAN
to confirm your selection. If you
chose Y in Step 8,a Dwill be displayed with the directory entry.
Note: When memory is full the screen displays
MEMORY FULL,
an error
tone sounds, and you will not be able to store a new number until you
delete a stored number.
Edit a Number/Name Stored in Memory
1 Press
MEM
. The screen displays ENTER 0-9.
2 Press the memory location key of the entry you wish to edit.
3 When the screen displays the number you want to edit, press
SELECT
. Then press or until EDIT flashes.
DIAL EDIT ERASE
973-555-0123
4 Press
SELECT
. The screen displays the name and number. The
flashing cursor appears at the end of the name. Use , and
the dial pad keys to edit the name. Press
SELECT
to move on to edit
the number. Press
SELECT
to move on to edit the Distinctive Ring
setting.
5 Press
SELECT
to save the edited information.
TELEPHONE MEMORY