User’s manual w w w. v t e c h .
Table of contents 1. IMPORTANT SAFETY INSTRUCTIONS .......................1 5. TROUBLESHOOTING .................................................16 2. SETTING UP THE TELEPHONE ...................................2 6. TECHNICAL SPECIFICATIONS..................................17 2.1 2.2 2.3 2.4 2.5 Package contents ..............................................................2 Location .............................................................................2 Setting up ...............................
1. IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all the instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
2. SETTING UP THE TELEPHONE 2.1 Package contents The package contains the following items: ･ 1 Handset ･ 1 Charger ･ 1 AC power adapter 1 Rechargeable battery pack 1 Chinese user’s manual 1 English user’s manual Location For maximum coverage and reduce the interference, here are some guidelines you should consider when you place the base unit, - place it at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.
2.3 Setting up 2.3.1 Connecting the charger 1. Plug the power supply into the charger. 2. Plug the power supply cord into the wall outlet not controlled by a wall switch. Note: Always use the cables provided in the box.
2.4 1. 2. 3. 4. Installing and charging the battery pack Slide off the battery compartment cover to remove it. Place the supplied battery pack as indicated. Respect polarity. Slide the battery compartment cover back. Put the handset on the base and charge for 16 hours first time. A beep indicates that the handset is properly placed on the base or charger. Setting up the telephone Notes: 1. Use only the supplied NiMH rechargeable battery pack. 2.
2.5 Setting date and time You will need to set the correct time and date so that you can get to know when you received answering machine messages (applicable to model with answering machine) or call list entries. 2.5.1 Change the Date Format U/D to select HS SETTINGS. U/D to select DATE & TIME. Press OK and U/D to select DATE FORMAT. Press OK and U/D to select your desired date format (DD-MM-YY or MM-DD-YY). 1. Press and 2. Press OK and 3. 4. 5. Press OK to confirm. 2.5.
Note: 1. If time has been set before, the current time will display, otherwise, "HH:MM" will display. 2. If date has been set before, the current date will display, otherwise, "DD-MM-YY" will display. Your VT2030 is ready for use.
3. GETTING TO KNOW YOUR PHONE 3.1 Overview of the Handset 1. EARPIECE 2. UP In idle mode: Press to access the call list In menu mode: Press to scroll up the menu items In Phonebook list/Redial list/Call List: Press to scroll up the list During a call: Press to increase the volume In number editing mode: Press to move the cursor one character to the left 3.
3.2 Handset LCD Display Icons and Symbols The LCD display gives you information on the current status of the telephone. Getting to know your phone Steadily on when the handset is within range of the base. Flashes when the handset is out of range of the base or not registered to the base. Steadily on when an intercom is in progress. Flashes when there is an incoming internal call or being put on hold. Off when the intercom call goes on hook. Steadily on indicates a call is in progress.
Steadily on indicates that the keypad is locked. Off indicates that the keypad is unlocked. Steadily on when there are newly received Voice Message Waiting (VMWI) not yet read. Off when all the new voice messages have been read. Steadily on indicates the battery is fully charged. Whole icon flashes when the battery performs initial charging. Internal block icon flashes when the battery is in final charging stage. Steadily on indicates the battery needs charging.
3.3 Charger Charging cradle Getting to know your phone 3.4 Navigating the menus 1. Press 2. Press 3. Press 4. Press . U/D to scroll through the menu. /OK to open a sub-menu or validate an option. ]/ RIGHT SOFT KEY to go back to previous menu level or cancel an action.
3.5 Menu map In idle mode, press Key Press /OK will firstly access the Call List menu. Refer to the following for the menu structure.
4 USING ADDITIONAL HANDSETS You can add new VT2030 accessory handsets to your VT2032 system, but each device must be registered with the telephone base before use. Up to five handsets can be registered to the same base. When first purchased, each expansion handset shows "NOT REGISTERED". You may need to charge the handset before registering to the telephone base. 4.1 Registration 1. Press and U/D on the handset to select REGISTRATION. 2.
4.2.1 Intercom Another Handset 1. In idle mode, press ]/ RIGHT SOFT KEY and the numbers of the registered handsets and base will display except the calling handset. 2. Enter the desired handset number to intercom with. 3. The called handset rings and press T on the called handset to establish the internal call. Note: If only two handsets are registered to the base station, press 4.2.2 ]/ RIGHT SOFT KEY will call another handset immediately. Intercom the Base 1. In idle mode, press 2.
4.2.4 Transfer an External Call from Handset to Handset During an external call: 1. Press and U/D to select INTERCOM. 2. Press OK to select the desired handset to intercom with. 3. The external call is put on hold automatically and the called handset rings. 4. Press T on the called handset to establish an internal call. O on the calling handset or put the calling handset on the charging cradle to end the current call with the external party. 6. The external call is transferred to the called handset.
4.2.7 Make a 3-way Conference Call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required. During an external call: 1. Follow Steps 1 to 4 in section 4.2.4. 2. Press and hold - on the calling handset to establish the conference call. Note: Any handset hangs up during a conference call will leave the other handset still in connection with the external call. 4.2.
5. TROUBLESHOOTING If you have difficulty with your phone, please try the suggestions listed below. Please also check the user's manual of VT2032 for more detailed troubleshooting items. Problem "PLEASE SET TIME" is displayed. T When connected to a PBX, no and/or Dialing prefix is needed. wrong connection after dialing. a. Base station may be out of range. "OUT OF RANGE" is displayed. b. Base station may not be connected to mains. Service may not be activated or wrong operation The call does not work.
6. TECHNICAL SPECIFICATIONS Basic Information Dimensions Handset: 212 x 51.8 x 26.8mm Charger: 129.8 X 100.8 X 75.1mm Weight Handset: 130.8g Charger: 102g Power consumption Charger: <1.8W Valid range Indoor: 50m Outdoor: 300m Handset Operating Time Standby time: 100Hours Talk time: 10Hours RF Parameter Transmission Power Handset: <25dBm Frequency 1881.792 -1897.344 MHz Number of Channels 10 Supply Power Charger: Input AC100-240V; output DC6V; 450MA adaptor Handset 2 x NIMH; 2/3 AAA; 2.
Customer Service Centre Suite 1601, Lever Tech Centre, 69-71 King Yip Street, Kwun Tong, Kowloon, Hong Kong. Customer Service Hotline: (852) 2666 5558 Technical Inquiry Hotline: (852) 2667 7433 Distributed in Hong Kong by: VTech Telecommunications Ltd.
