User`s manual

17
8.2 Base Settings
8.2.1 De-register a Handset
You are requested to enter the 4-digit PIN in order to de-register a handset from
icon on the de-registered handset will be off.
Note: You cannot de-register the handset that you are currently using.
1. Press <Menu> and <UP/DOWN> to select Base Settings.
2. Press <Select> and <UP/DOWN> to select Delete HS.
3. Press <Select> and you are requested to enter the 4-digit system PIN.
4. Enter the 4-digit system PIN.
5. Press <OK> and a list of registered handsets is displayed.
6. Press <UP/DOWN> to select one of the handsets that you want to de-register.
Note: If handset de-registration is unsuccessful, “Invalid HS” will display.
7. Press <Select> to confirm.
Note: If handset de-re
gistration is successfully done, “HS Deleted” will display.
8.2.2 Change the dial mode
1. Press <Menu> and <UP/DOWN> to select Base Settings.
2. Press <Select> and <UP/DOWN> to select Dial Mode.
3. Press <Select> and <UP/DOWN> to select Tone or Pulse.
4. Press <Select> to confirm.
8.2.3 Change the Flash Time
1. Press <Menu> and <UP/DOWN> to select Base Settings.
2. Press <Select> and <UP/DOWN> to select Flash Time.
3. Press <Select> and <UP/DOWN> to select your desired flash time (
Short, Medium, Long).
4. Press <Select> to confirm.
8.2.4 Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station.
It is used to protect your
phone against unauthorized use. The default system PIN code is 0000.
the base station. The antenna
8.1.10
Reset handset settings to default
You can reset your phone to the default settings. After reset, all you personal
settings will be deleted, but your phonebook, call list and redial list entries
remain unchanged.
1. Press <Menu> and <UP/DOWN> to select HS Settings.
2. Press <Select> and <UP/DOWN> to select HS Default.
3. Press <Select> to enter the 4-digit system PIN (Default 4-digit system PIN:
0000)
4. Press <OK> to confirm.
5. Press <OK> to reconfirm.
Note: If the PIN code is entered correctly and is confirmed to restore the HS
settings to default settings, “Reset” will display. If the PIN code is entered
incorrectly, “PIN Invalid” will display.