Specifications

Technical Reference Booklet

Motherboard Layout (35-AA24-X0-XX)

The following diagrams show the relative positions of the jumpers, connectors, major

components and memory banks on the motherboard.

NOTE

1) Be sure to check the cable orientation in order to match the colored strip to the pin

1 end of the connector.

2) When you start up the system, please wait for 5 seconds after you power on AC.

3) It is not recommended to add a metal spacer plate on the back of the Socket478.

Otherwise, some components will be short and damaged.

# The LAN Connector ,CN63 and CNR Slot are optional.

# The ALC650 embeds an internal analog switch (by driver software) to share

LINE input with Surround output, and share MIC input with CENTER/LFE

output.