Specifications

Technical Reference Booklet

Connectors

The mainboard provides connectors to connect to FDD, IDE HDD,

Serial ATA Hard Disk,USB devices, CPU/PWRFAN/WOL ,etc.

Floppy Disk Drive Connector:FDD1

The mainboard provides a standard floppy disk drive connector that

supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.

Hard Disk Connectors:IDE1&IDE2

The mainboard has a 32-bit Enhanced PCI IDE and Ultra DMA 33/66/100/

133controller that provides PIO mode 0~4, Bus Master, and Ultra DMA 33/66/

100/133function. You can connect up to four hard disk drives, CD-ROM, 120MB

Floppy (reserved for future BIOS) and other devices.

IDE1 (Primary IDE Connector)

The first hard drive should always be connected to IDE1.IDE1 can connect

a Master and a Slave drive.You must configure second hard drive to Slave

mode by setting the jumper accordingly.

IDE2 (Secondary IDE Connector)

IDE2 can also connect a Master and a Slave drive.

IDE2

FDD1

IDE1