Specifications

TO MUTE A CALL
Press (SE) on the handset to
disable the handset microphone.
Here's a brief guide to the features and
functions of your
VTech
VT 1910c
cordless telephone:
Press (E) again to return to
normal operation.
SET-UP
Connect telephone line cord to
base unit and telephone jack.
THE BASE FEATURES
TO PAGE THE HANDSET
Plug AC adapter into a standard
electrical outlet
To age from the base, press
(&].
Set Dial Mode switch to PULSE or
TONE. The unit is factory set to
TONE.
To cancel the PAGE either press
again on the base or press
Let handset battery pack charge
for
16 hours before first use.
STORING:
The phone should be OFF.
AC POWER JACK- ]
PHONE CORD JACK
TONEIPULSE SELECTOR
7
MAKING CALLS
Press the (m) key on the
handset. When the
"PHONE ON"
indicator is displayed and you hear
a dial tone, dial the number.
Enter the number vou wish to store
on the LCD up to
a maximum of 20
diaits.
ANTENNA
POWER
INDICATOR
IN
USE
INDICATOR
CHARGING
INDICATOR
SPARE BATT
INDICATOR
PAGE KEY
MEMORY
THE PHONE SHOULD BE
OFF
Enter the number to be dialed on
the
LCD and then press the PHONE
key.
ENTER THE TELEPHONE
NUMBER YOU WISH TO
STORE
PRESS-
YOU WILL SEE
~FOGRFIM
ANSWERING CALLS
To answer a call on the handset,
press any key other than
m,
(WE), or the Volume Keys on the
handset. The handset will not
auto-answer when lifted off the
base cradle.
>"sJ
@CRT ION -- j
ENTER MEMORY
LOCATION (01 - 20)
Press (KG].
DIALING CARD
SPARE BATTERY CHARGING
Enter the two digit memory location
(01 .. 20), the unit will store the
number, emit a happy tone to
confirm successful programming
and exit program mode.
HANGING UP
Press (OFF) on the handset or
place the handset in the base
cradle to hang up a call.
TO PLACE A CALL ON HOLD
Press (*) on the handset
to place an active call on hold.
Press again to return to
the call.
THE BASE UNIT LAYOUT