User guide
59
To set the Time Zone:
1. From the Date & Time menu, press q to highlight Time Zone.
2. Press t or u to select a setting. The time zone is set as an offset from GMT.
For example, EST is -5, and PST is -8.
3. Press
Save
.
To enable or disable the NTP (Network Time Protocol) server:
1. From the Date & Time menu, press q to highlight NTP server.
2. Press t or u to select Enabled or Disabled.
3. Press
Save
.
Note: If the NTP server is disabled, you must manually set the time and date.
This setting is valid only if the system administrator has already congured
the Network Time settings. For more information, see the VSP735 Deskset
Administrator and Provisioning Guide.
To manually set the Year, Month, Day, Hour and Minute:
1. From the Date & Time menu, press q to highlight Set manually.
2. Press SELECT.
Note: If the NTP server is enabled, you cannot modify this setting. See “To
enable or disable the NTP (Network Time Protocol) server” above.
3. For each setting, press t or u to select the desired setting, and then press
q to move to the next line.
4. When you have nished, press
Save
.
Display
Use the Display menu to set screen appearance and backlight behavior.
To use the Display menu:
1. When the phone is idle, press
Settings
.
The User Settings menu appears.
2. Press p or q to highlight User Settings, then press SELECT.
3. Press p or q to highlight Display, then press SELECT.
The Display menu appears.
Conguring the Phone
Setting the date and time (continued)