Quick Start Guide VSP735 SIP Endpoint Deskset
Important Safety Information This symbol is to alert you to important operating or servicing instructions that may appear on the product or in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1.
12. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the telephone base or handset other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 13. Do not overload wall outlets and extension cords. 14.
19. Use only the power cord indicated in this manual. 20. In wall mounting position, make sure to mount the telephone base on the wall by aligning the eyelets with the mounting studs of the wall plate. Then slide the telephone base down on both mounting studs until it locks into place. Refer to the full instructions in Deskset Installation in the User Guide. 21. CAUTION: Keep small metallic objects such as pins and staples away from the handset receiver.
Compliance FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
About this Guide This quick start guide provides a reference for the external features of the phone and basic installation instructions. Please refer to the VSP735 Deskset User Guide for complete installation and operation instructions. You can download the guide from businessphones.vtech.com. For customer service or product information, visit our website at businessphones.vtech.com or call 1 (888) 370-2006. Parts Checklist Your telephone package contains the following items.
Quick Reference Guide MENU Press to display the deskset menu. SCREEN Displays call information, soft key labels, and deskset menus. MESSAGE WAITING indicator Flashes when you have a new voice message. MESSAGE Press to display the message menu. CALL HISTORY Press to view caller ID information. DIRECTORY Press to view directory information. SOFT KEYS Perform the actions indicated by the on-screen labels. SELECT Press to select a menu item or save an entry or setting.
Quick Reference Guide External Features Programmable keys Perform various functions and access various features. For example: • Press to access a line to make a call. • Press to dial a monitored extension or a quick-dial number. • Press to answer a ringing call on any line or monitored extension. Key label card To write on the key label card, pull out the card from under the plastic cover. LOWER Press to access the second level (alternate function) of a programmable key.
Deskset Installation This section assumes that your network infrastructure is established and that your IP PBX phone service has been ordered and configured for your location. For more information about installation options and phone setup, see the VSP735 Deskset User Guide and the VSP735 Deskset Administrator and Provisioning Manual, available at businessphones.vtech.com. You can power the phone using the supplied power adapter or using Power over Ethernet (PoE) from your network.
Installing the phone Make sure you plug in the Ethernet cable before powering up the phone. 1. Attach the stand. a. Lift the kickstand and flip it back. Let it rest at its maximum angle. b. Snap the stand onto the two snap points on the deskset base. 2. Plug the end of the coiled handset cord into the jack on the left side of the telephone. 3. Lift the deskset base to the desired angle. There are three pairs of grooves designed to hold the phone at different angles for optimum visibility. 4.
5. Plug one end of the Ethernet cable into the Ethernet port on the rear of the deskset (marked by ), and plug the other end of the cable into your network router or switch. If the deskset is not using power from a PoE-capable network router or switch: a. Connect the supplied power adapter to the deskset power jack. b. Plug the power adapter into an electrical outlet that is not controlled by a wall switch.
If there is a networked computer and no extra Ethernet wall ports near the phone, then the phone and PC can share the same network connection. To share a network connection with a PC: 1. Plug a Cat.-5 Ethernet cable into the PC port on the phone (marked by ). 2. Plug the other end of the Cat.-5 Ethernet cable into your computer’s Ethernet port. • If a PC is connected to your network through a phone, any phone resets and power or network interruptions will disrupt the PC’s connection to the network.
6. Align the upper wall mounting hole on the back of the phone with the upper tab of the standard wall plate. Make sure the lower wall mounting hole on the mounting bracket also aligns with the lower tab of the standard wall plate. Push the phone down until it clicks securely in place. 7. Bundle the Ethernet cable and power adapter cord neatly with twist ties. 8.
Maintenance Taking care of your telephone • Your telephone base contains sophisticated electronic parts, so you must treat it with care. • Avoid rough treatment. • Place the corded handset down gently. • Save the original packing materials to protect your telephone base if you ever need to ship it. Avoid water • You can damage your telephone base if it gets wet. Do not use the corded handset in the rain, or handle it with wet hands. Do not install the telephone base near a sink, bathtub or shower.
VTECH COMMUNICATIONS LTD. A member of THE VTECH GROUP OF COMPANIES. Distributed in the U.S.A. by VTech Communications Inc., Beaverton, Oregon 97008. VTech is a registered trademark of VTech Holdings Limited. Copyright © 2014 for VTECH COMMUNICATIONS LTD. All rights reserved. Printed in China.
