Owner's Manual

VSP735 Administrator and Provisioning Manual
46 WebUI: System
Setting Description
Name Enter the name of the paging zone. Names can be a maximum of
15 characters. The paging zone name is displayed on the LCD
during incoming and outgoing multicast pages.
Multicast IP Enter the paging zone multicast IP address. The IP address range
for multicast addresses is 224.0.0.0–239.255.255.255.
Multicast Port Enter the multicast port used by the multicast IP address. The
valid port range is 1 to 65535.
Priority Select the paging zone priority from 1 to 10. Zones with a
priority higher than another zone can interrupt the lower-priority
zone’s active page.
In addition, a call priority setting is available in the configuration
file (page_zone.call_priori
ty_threshold). This priority setting also
ranges from 1 to 10 (2 is the default). If the paging zone priority
is higher or equal to the call priority, then a multicast page can
interrupt an active, dialing, or incoming call.
Enable Incoming
Page
Select to enable the deskset to receive incoming pages for that
paging zone. If the “Enable Incoming Page” checkbox is not
selected, the phone will not listen for the multicast, but will still
be able to broadcast an outgoing page.