Owner's Manual

VSP735 Administrator and Provisioning Manual
41 WebUI: System
Page
Configures the key to call one or a group of phones. Pressing the key
dials the Paging feature access code. You must enter the feature access
code for Paging on the SIP Account Management page.
You can configure pages to be automatically answered. See “Page Auto
Answer” under SIP Account Management.
Multicast Page Configures the key to make outgoing multicast pages. In the Value
column, enter a valid Paging Zone ID (ranging from 1 to 10). Multicast
paging differs from standard paging in that it is handled locally by the
Deskset and does not require a subscription through the hosted server.
To use multicast paging, you must first set up paging zones on the
WebUI. See Error! Reference source not found. on page Error!
Bookmark not defined.
Park Call Enables the user to park a call. Pressing the key dials the Call Park
feature access code (FAC) configured on the SIP Account Management
page. In the Account column, select the account on which the feature
access code will be dialed out. For example, choose Account 1 if you
wish to use the Call Park FAC that you entered for account 1.
Retrieve Park
Call
Enables the user to retrieve a parked call. Pressing the key dials the
Parked Call Retrieval feature access code (FAC) configured on the SIP
Account Management page. In the Account column, select the account
on which the feature access code will be dialed out. For example,
choose Account 1 if you wish to use the Parked Call Retrieval FAC that
you entered for account 1.
In Call DTMF Configures the key to dial a string of numbers while the end user is on a
call. For example, pressing the key might dial a conference access code.
After selecting In Call DTMF, enter the number to be dialed in the Value
column.
Call return Configures the key to dial the number of the last missed call.
Group Call
Pickup
Enables the user to answer a call ringing at another extension. The call
can be ringing at any extension in the phone’s call pickup group.
Pressing the key dials the Group Call Pickup feature access code (FAC)
configured on the SIP Account Management page.
Direct Call
Pickup
Enables the user to answer a call ringing at a specific deskset. Pressing
the key dials the Direct Call Pickup feature access code (FAC) configured
on the SIP Account Management page. Depending on the server
requirements, the user may then need to enter the number of the
ringing extension.