Owner's Manual

VSP735 Administrator and Provisioning Manual
21 Using the WebUI
Using the WebUI
The Web User Interface (WebUI) resides on your deskset. You can access it using an
Internet browser. After you log in to the WebUI, you can configure the phone on the
following pages:
 System
o SIP Account Management
o Call settings
o User Preferences
o Programmable Keys
o Speed Dial Keys
o Signaling Settings
o Ringer Settings
 Network
o Basic Network Settings
o Advanced Network Settings
 Contacts
o Local Directory
o Blacklist
o LDAP
o Broadsoft
o Call History
 Servicing
o Reboot
o Time and Date
o Firmware Upgrade
o Provisioning
o Security
o Certificates
o System Logs
The WebUI also has a Status page, where you can view network status and general
information about your phone. The information on this page matches the Status
menu on the phone.
To access the WebUI:
1. Ensure that your computer is connected to the same network as your deskset.
Your computer may already be connected to the network through the PC port on
the back of your deskset.
2. Find the IP address of your phone:
a. When the phone is idle, press MENU
.
b. Press  to
highlight Status, and then press SELECT.
c. With Network highlighted, press SELECT.
The Network status screen appears.
d. On the Network status screen, note the IP Address.