Owner's Manual

VSP735 Administrator and Provisioning Manual
18 Using the Phone Menu
To set other settings (DNS and NTP):
1. From the Network setting menu, press  or  to highlight Others, and then
press SELECT.
If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the Network setting menu.
Cancel Save
Others
DNS 1: 0.0.0.0
Backspc Add dot
DNS 2: 0.0.0.0
SNTP: us.pool.ntp.org
2. Enter the IP address for the primary DNS server. Use the dial pad and the
Add dot soft key to enter characters. Press  or  to advance to the next
character.
3. Press  and enter the IP address for the secondary DNS server. The deskset uses
this server if the primary server does not respond.
4. Press  and enter the IP address for the NTP server. If the deskset does not use
an NTP server, you must manually enter the time and date settings.
5. Press Save.
Line Menu
Use the Line menu to configure line-specific settings for the phone.
To use the Line setting menu:
1. From the Admin Settings menu, press  to highlight Line, and then press
SELECT.
The Line menu appears.
Back Select
Line
LINE 1
LINE 2
LINE 3
LINE 4
LINE 5