Owner's Manual

VSP735 Administrator and Provisioning Manual
17 Using the Phone Menu
3. Press  and enter the Subnet Mask. Use the dial pad and the Add dot soft key to
enter characters. Press  or  to advance to the next character.
4. Press  and enter the Gateway. Use the dial pad and the Add dot soft key to
enter characters. Press  or  to advance to the next character.
5. Press Save.
To set the VLAN ID:
1. From the Network setting menu, press  or  to highlight VLAN ID, and then
press SELECT.
The VLAN ID menu appears.
Cancel Save
VLAN ID
WAN VLan: Disabled
WAN port: 0
PC VLan: Disabled
PC port: 0
2. On the VLAN ID menu, press  or  to enable or disable the WAN Vlan.
3. Press  and enter the WAN port number. Use the dial pad and the Backspc soft
key to enter characters. The valid range is 0 to 4095.
4. Press  and then press  or  to enable or disable the PC port Vlan.
5. Press  and enter the PC port number. Use the dial pad and the Backspc soft key
to enter characters. The valid range is 0 to 4095.
6. Press Save.