Owner's Manual

VSP735 Administrator and Provisioning Manual
139 Appendix A: Configuration File Settings
Setting:
page_zone.x.multicast_address
Description: Enter the multicast IP address that the deskset will monitor. The range
of valid IP addresses is 224.0.0.0 to 239.255.255.255.
Values: IPv4 IP address Default: blank
Setting:
page_zone.x.multicast_port
Description: Enter the multicast port associated with the multicast IP. The range of
valid ports is 1 to 65535.
Values: 1–65535 Default: blank
Setting:
page_zone.x.accept_incoming_page
Description: Enables or disables the deskset from receiving incoming multicast
pages for that paging zone. If disabled, the deskset can make
outgoing multicast pages only.
Values: 0 (disabled), 1 (enabled) Default: 1
Setting:
page_zone.x.priority
Description: Set the paging zone priority from 1 to 10. Zones with a priority higher
than another zone can interrupt the lower-priority zone’s active page.
Values: 1–10 Default: 5
Setting:
page_zone.call_priority_threshold
Description: Set the call_priority_threshold. If the paging zone priority
(page_zone.x.priority) is higher or equal to the call priority, then a
multicast page can interrupt an active, dialing, or incoming call.
Values: 1–10 Default: 2