Owner's Manual

VSP735 Administrator and Provisioning Manual
115 Appendix A: Configuration File Settings
Setting:
time_date.timezone_dhcp_option
Description: Enables or disables DHCP option 2/100/101 for determining time zone
information.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
time_date.ntp_server_update_interval
Description: Sets the delay between NTP server updates, in seconds.
Values: 0–4294967295 Default: 1000
“log” Module: Log Settings
The log settings control system logging activities. The following logging modes are
supported:
 Serial/Console
 Syslog server
 Volatile file
The log settings follow the format: log.element.
These settings can be exported when you manually export the configuration from the
phone, except for the settings shaded in gray in the table.
All the log settings are included in the general configuration file.
Setting:
log.syslog_enable
Description: Enables or disables log output to syslog server.
Values: 0 (disabled), 1 (enabled) Default: 0
Setting:
log.syslog_server_address
Description: Sets the syslog server IP address.
Values: Text string (IPv4) Default: Blank
Setting:
log.syslog_server_port
Description: Sets the syslog server port.
Values: 1–65535 Default: 514