Administrator and Provisioning Manual VSP735 SIP Endpoint Deskset Rev.
VSP735 Administrator and Provisioning Manual Congratulations on your purchase of this VTech product. Before using this VTech product, please read Important Safety Information on page 141 of this manual. Please thoroughly read this manual for all the feature operations and troubleshooting information necessary to install and operate your new VTech product. You can also visit our website at businessphones.vtech.com or call 1 (888) 370-2006.
VSP735 Administrator and Provisioning Manual Table of contents Introduction .................................................................................................. 5 Audience ................................................................................................... 5 Related documents ..................................................................................... 5 About the deskset.......................................................................................
VSP735 Administrator and Provisioning Manual The Provisioning Process.............................................................................77 Phone Restart ...........................................................................................78 Configuration File Types..............................................................................79 Data Files .................................................................................................79 Configuration File Guide...............
VSP735 Administrator and Provisioning Manual Introduction This administrator and provisioning manual contains detailed instructions for configuring the VSP735 deskset. Please read this manual before attempting to configure the telephone. Audience This manual is written for installers and system administrators. It assumes that you are familiar with networks and VoIP, both in theory and in practice.
VSP735 Administrator and Provisioning Manual There are two network ports, known as the Ethernet port and PC port, at the back of the deskset. The Ethernet port allows the VSP735 deskset to connect to the IP PBX. The PC port is for another device such as a personal computer to connect to the Ethernet network through the deskset.
VSP735 Administrator and Provisioning Manual Getting started Quick reference guide The controls you will need to use to configure the phone manually are described below. MENU Press to enter the menu. NAVIGATION KEY While in menus, press or to scroll through the menu, highlight items or change settings. While entering names or numbers, press or to move the cursor left or right.
VSP735 Administrator and Provisioning Manual Programmable Keys The table below lists the default settings for the programmable feature keys (PFKs). The key assignments on your phone may be different. Some keys may be programmed as Quick Dial keys, for example. To assign functions to programmable keys, see Programmable Keys on page 39.
VSP735 Administrator and Provisioning Manual Network Requirements A switched network topology is recommended for your LAN (using standard 10/100 Ethernet switches that carry traffic at a nominal rate of 100 Mbit/s). The office LAN infrastructure should use Cat.-5/Cat.-5e cable. The LAN connections to the deskset(s) should all be wired. However, wireless connections to other devices (such as laptops) in your office will not impede performance. All desksets must reside on a single subnet.
VSP735 Administrator and Provisioning Manual Configuring the Phone You can configure the phone using one of three methods: From the phone itself, using the menus. The phone menus are best suited to configuring a few settings, perhaps after the initial setup has been done. For administrators, the settings available on the phone menus are limited to network settings. See Using the Admin Settings menu on page 14. Most of the settings accessible on the phone itself are most useful for end users.
VSP735 Administrator and Provisioning Manual Using the Phone Menu The phone menu has four main sub-menus: Features—manage calls, view and add directory entries, view call history, access messages, and use the speed dial menu. Status—view the deskset network status, account registration status, and product information. User Settings—allows the user to set the language for the display, configure the appearance of the display, customize the audio settings, and register a DECT headset.
VSP735 Administrator and Provisioning Manual Status 1.Network 2.Line 3.Product Info Back Select 3. On the Status menu, press or to highlight the desired menu, then press SELECT. The available status menus are listed in the following table. Menu 1. Network 2. Line 3. Product Info Information listed IP address DHCP status (Enabled/Disabled) Subnet Mask Gateway IP address DNS server 1 IP address DNS server 2 IP address SNTP server URL MAC address Lines and registration status.
VSP735 Administrator and Provisioning Manual Viewing Line status When you select Line from the Status menu, the Line menu appears, listing the available lines along with icons indicating each line’s current registration status. Line LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 Back Icon Select Description Line registered Line not registered To view complete status information for a line: 1. On the Line menu, press or to highlight the desired line, and then press SELECT. The full line status screen appears.
VSP735 Administrator and Provisioning Manual Using the Admin Settings menu To access the Admin Settings menu: 1. When the phone is idle, press MENU. The Main menu appears. Main Menu 1.Features 2.Status 3.User settings 4.Admin settings Back Select 2. Press or to highlight Admin Settings, and then press SELECT. -orPress 4 (Admin settings) on the dial pad. 3. Use the dial pad to enter the admin password, and then press ENTER.
VSP735 Administrator and Provisioning Manual The Admin Settings are listed in the following table. Setting Options 1. Network setting 1. DHCP (Enable, Disable) 2. Set static IP 3. VLAN ID 4. Others 2. Line LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 3. Provisioning 1. Server 2. Login 3. Password 4. Reset to default Press SELECT to display a screen that allows you to reset the phone to factory default settings. 5. Restart phone Press SELECT to display a screen that allows you to restart the phone.
VSP735 Administrator and Provisioning Manual Network setting 1.DHCP 2.Set static IP 3.VLAN ID 4.Others Back Select 2. Press or to highlight the desired option, and then press SELECT: DHCP Set static IP VLAN ID Others (DNS and NTP servers). To enable or disable DHCP: 1. From the Network setting menu, press or to highlight DHCP, and then press SELECT. 2. Press or to select Enabled or Disabled, and then press Save.
VSP735 Administrator and Provisioning Manual 3. Press and enter the Subnet Mask. Use the dial pad and the Add dot soft key to enter characters. Press or to advance to the next character. 4. Press and enter the Gateway. Use the dial pad and the Add dot soft key to enter characters. Press or to advance to the next character. 5. Press Save. To set the VLAN ID: 1. From the Network setting menu, press or to highlight VLAN ID, and then press SELECT. The VLAN ID menu appears.
VSP735 Administrator and Provisioning Manual To set other settings (DNS and NTP): 1. From the Network setting menu, press or to highlight Others, and then press SELECT. If DHCP is disabled, the Others menu appears. If DHCP is enabled, an error message appears briefly before returning you to the Network setting menu. Others DNS 1: 0.0.0.0 DNS 2: 0.0.0.0 SNTP: us.pool.ntp.org Cancel Backspc Add dot Save 2. Enter the IP address for the primary DNS server.
VSP735 Administrator and Provisioning Manual 2. Highlight the desired line, if necessary, by pressing , and then press SELECT. The full configuration menu for that line appears. LINE 1 Display name: John Smith User ID: 2325550176 Auth ID: 2325550176 Password: ********* SIP Registrar: 10.88.51.60 Registrar port: 5060 Proxy: Cancel 10.88.51.
VSP735 Administrator and Provisioning Manual Provisioning Menu Use the Provisioning menu to manually configure auto-provisioning settings. For more information about auto-provisioning, see Provisioning on page 67 and Provisioning Using Configuration Files on page 77. On the Provisioning menu you can configure: Server string—the URL of the provisioning server. The URL can include a complete path to the configuration file. Login ID—the username the phone will use to access the provisioning server.
VSP735 Administrator and Provisioning Manual Using the WebUI The Web User Interface (WebUI) resides on your deskset. You can access it using an Internet browser.
VSP735 Administrator and Provisioning Manual Network IP: 10.88.51.133 DHCP: Enable Subnet Mask: 255.255.0.0 Gateway: 10.88.3.120 DNS 1: 10.88.126.31 DNS 2: 10.88.126.10 SNTP: us.pool.ntp.org 3. On your computer, open an Internet browser. (Depending on your browser, some of the pages presented here may look different and have different controls. Ensure that you are running the latest update of your preferred browser.) 4.
VSP735 Administrator and Provisioning Manual WebUI: Status The WebUI System Status page is equivalent to the Status menu on the deskset. The System Status page shows: General information about your phone, including model, MAC address, and software version Account Status information about your SIP account registration Network information regarding your phone’s network address and network connection Cordless Status indicating whether a cordless headset is registered to the deskset.
VSP735 Administrator and Provisioning Manual WebUI: System SIP Account Management On the SIP Account Management pages, you can enter the account settings for each line you have ordered from your service provider. Each line has its own Account settings page. The sip account settings are also available as parameters in the configuration file. See “sip_account” Module: SIP Account Settings on page 88.
VSP735 Administrator and Provisioning Manual Authentication password If authentication is enabled on the server, enter the authentication password for authentication with the server. Dial Plan Enter the dial plan, with dialing strings separated by a | symbol. See Dial Plan on page 26. Inter Digit Timeout (secs) Sets how long the phone waits after any “P” (pause) in the dial string or in the dial plan.
VSP735 Administrator and Provisioning Manual Dial Plan The dial plan consists of a series of dialing rules, or strings, that determine whether what the user has dialed is valid and when the phone should dial the number. Dialing rules must consist of the elements defined in the table below. Element x [0-9] x+ Description Any dial pad key from 0 to 9, including # and *. Any two numbers separated by a hyphen, where the second number is greater than the first.
VSP735 Administrator and Provisioning Manual SIP Server Settings Setting Description Server address Enter the IP address or domain name for the SIP server. Server port Enter the port number that the SIP server will use. Registration Settings Setting Description Server address Enter the IP address or domain name for the registrar server. Server port Enter the port number that the registrar server will use. Expiration Enter the desired registration expiry time in seconds.
VSP735 Administrator and Provisioning Manual Backup Outbound Proxy Settings Setting Description Server address Enter the IP address or domain name for the backup proxy server. Server port Enter the port number that the backup proxy server will use. Audio Settings Setting Description Ringer Tone Sets the ringer tone for incoming calls on the account. Codec priority 1 Select the codec to be used first during a call.
VSP735 Administrator and Provisioning Manual Quality of Service Setting Description DSCP (voice) Enter the Differentiated Services Code Point (DSCP) value from the Quality of Service setting on your router or switch. DSCP (signalling) Enter the Differentiated Services Code Point (DSCP) value from the Quality of Service setting on your router or switch. Signaling Settings Setting Description Local SIP port Enter the local SIP port.
VSP735 Administrator and Provisioning Manual Feature Access Codes Settings If your IP PBX service provider uses feature access codes, then enter the applicable codes here. You can assign many of these features to programmable feature keys, which enables end users to press the keys to dial out the codes you enter here. To configure programmable feature keys, see Programmable Keys on page 39. Setting Description Assignable to PFK? Paging Enter the paging access code.
VSP735 Administrator and Provisioning Manual Call Forward No Answer ON Enter the Call Forward No Answer ON access code. Yes Call Forward No Answer OFF Enter the Call Forward No Answer OFF access code. Yes Call Forward Busy ON Enter the Call Forward Busy ON access code. Yes Call Forward Busy OFF Enter the Call Forward Busy OFF access code. Yes Anonymous Call Reject ON Enter the Anonymous Call Reject ON access code. No Anonymous Call Reject OFF Enter the Anonymous Call Reject OFF access code.
VSP735 Administrator and Provisioning Manual Busy Lamp Field Setting Description List URI Enter the BLF list URI, as supplied by or set up with your service provider. For example, blf-list1@sipservice.com. This list contains a list of extensions that are eligible for BLF monitoring. You can assign keys for BLF monitoring on the Programmable Keys page. See page 39. Remote Pickup Code Enter the remote pickup code for the BLF list, as supplied by your service provider.
VSP735 Administrator and Provisioning Manual Ignore unsolicited MWI When selected, unsolicited MWI notifications—notifications in addition to, or instead of SUBSCRIBE and NOTIFY methods—are ignored for account x. If the deskset receives unsolicited MWI notifications, the deskset Message Waiting LED will not light to indicate new messages. Disable this setting if: MWI service does not involve a subscription to a voicemail server. That is, the server supports unsolicited MWI notifications.
VSP735 Administrator and Provisioning Manual Music On Hold Settings Setting Description Enable Local MoH Enables or disables a hold-reminder tone that the user hears when a far-end caller puts the call on hold. Network Conference Settings Setting Description Enable Network Conference Enables or disables network conferencing for account x. Conference URI Enter the URI for the network bridge for conference handling on account x.
VSP735 Administrator and Provisioning Manual Call Settings You can configure call settings for each account. Call Settings include Do Not Disturb and Call Forward settings. The call settings are also available as parameters in the configuration file. See “call_settings” Module: Call Settings on page 126. General Call Settings Setting Description Anonymous Call Reject Enables or disables rejecting calls indicated as “Anonymous.” Enable Anonymous Call Enables or disables outgoing anonymous calls.
VSP735 Administrator and Provisioning Manual Call Forward Setting Description Enable Call Forward Always Enables or disables call forwarding for all incoming calls on that account. Select to enable. Target Number Enter a number to which all incoming calls will be forwarded. Enable Call Forward Busy Enables or disables forwarding incoming calls to the target number if the number of active calls has reached the maximum number of calls configured for account x.
VSP735 Administrator and Provisioning Manual User Preferences On the User Preferences page, you can configure some basic settings for the phone and set hold reminder and call waiting settings. The User Preferences page is also available to phone users when they log on to the WebUI. The user preference settings are also available as parameters in the configuration file. See “user_pref” Module: User Preference Settings on page 123.
VSP735 Administrator and Provisioning Manual Call Hold Reminder Setting Description Enable Call Hold Reminder Tone Enables or disables the call hold reminder tone. Select to enable. Tone Interval (secs) Sets the interval for the call hold reminder tone, in seconds. Call Waiting Setting Description Call Waiting Off When selected, disables incoming call notifications when the user is already on a call. Incoming calls are rejected.
VSP735 Administrator and Provisioning Manual Programmable Keys The deskset has 16 dual-function programmable keys. You can assign up to 32 functions to the programmable keys on the Programmable Keys page. Keys can have identical functions, depending on the “Type” of key. For example, you can assign several “Account”-type keys to Account 1 to enable users to manage multiple calls on Account 1. You can also assign multiple Quick Dial keys.
VSP735 Administrator and Provisioning Manual Type Description Account Configures the key for accessing an account. Users can make or answer calls by pressing these keys. The key LED will change according to call activity. After selecting Account in the Type column, select the account number in the Account column. Directory Configures the key to access the Directory menu. Users can then press the key to view the Directory menu. Call History Configures the key to access the Call History list.
VSP735 Administrator and Provisioning Manual Page Configures the key to call one or a group of phones. Pressing the key dials the Paging feature access code. You must enter the feature access code for Paging on the SIP Account Management page. You can configure pages to be automatically answered. See “Page Auto Answer” under SIP Account Management. Multicast Page Configures the key to make outgoing multicast pages. In the Value column, enter a valid Paging Zone ID (ranging from 1 to 10).
VSP735 Administrator and Provisioning Manual Speed Dial Keys On the Speed Dial page, you can enter up to 10 speed dial numbers. For each speed dial number you enter, you must assign the account on which the number will be dialed out. To dial a speed dial number, press and hold the dial pad key that matches the speed dial entry number. NOTE: This menu duplicates the speed dial menu on the phone (Main Menu > Features > Speed dial).
VSP735 Administrator and Provisioning Manual Speed Dial Keys Click the link for each setting to see the matching configuration file parameter in Appendix A: Configuration File Settings. Setting Description Name The name associated with the speed dial entry. Value The phone number that the speed dial key dials when pressed and held. Account The SIP account that the phone will use to dial the number.
VSP735 Administrator and Provisioning Manual NAT Traversal The NAT Traversal settings are communicated to the VoIP server so that the phone is reachable when connected to the Internet behind NAT. Setting Description Enable IP Masquerading Select to enable NAT traversal and IP masquerading. Public IP address Enter the external IP address of your router. This setting identifies the router’s public address to the VoIP server. Public SIP port Enter the router port number being used for SIP.
VSP735 Administrator and Provisioning Manual Setting Description Distinctive Ringing Text Enter the text that will match the “info” parameter and play the ringer tone. The matching of the “info” parameter and Distinctive Ringing Text is case sensitive. The maximum length of the Distinctive Ringing Text is 40 characters. Internal Ringer Tone Select the desired ringer from the list. Paging Zone On the Paging Zone page, you can enter the multicast IP addresses that the phone will monitor.
VSP735 Administrator and Provisioning Manual Setting Description Name Enter the name of the paging zone. Names can be a maximum of 15 characters. The paging zone name is displayed on the LCD during incoming and outgoing multicast pages. Multicast IP Enter the paging zone multicast IP address. The IP address range for multicast addresses is 224.0.0.0–239.255.255.255. Multicast Port Enter the multicast port used by the multicast IP address. The valid port range is 1 to 65535.
VSP735 Administrator and Provisioning Manual Network You can set up the phone for your network configuration on the Network settings page. Your service provider may require you to configure your network to be compatible with its service, and the phone settings must match the network settings. The network settings are also available as parameters in the configuration file. See “network” Module: Network Settings on page 102. After entering information on this page, click to save it.
VSP735 Administrator and Provisioning Manual Advanced Network Settings VLAN You can organize your network and optimize VoIP performance by creating a virtual LAN for phones and related devices. Click the link for each setting to see the matching configuration file parameter in Appendix A: Configuration File Settings. Default values and ranges are listed there. Setting Description Enable LAN Port VLAN Enable if the phone is part of a VLAN on your network. Select to enable.
VSP735 Administrator and Provisioning Manual LLDP-MED Setting Description Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for Media Endpoint Devices (LLDP-MED). LLDP-MED is a standards-based discovery protocol supported on some network switches. It is required for auto-configuration with VLAN settings. Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds). 802.1x Setting Description Enable 802.1x Enables or disables the 802.1x authentication protocol.
VSP735 Administrator and Provisioning Manual Contacts Local Directory On the Local Directory page, you can manage your local directory entries. You can sort, edit, delete, and add contact information for up to 200 entries. In order to back up your contacts or import another local directory file, the page also enables you to export and import your phone’s local directory. The Local Directory lists entries on up to 10 pages, with 20 entries per page.
VSP735 Administrator and Provisioning Manual The following table describes the buttons available on the Local Directory page. Click To… Sort the list by last name. Edit information for an entry View the next page of entries. View the last page of entries. View the first page of entries. Delete selected entries from the directory. Click Select All to select every entry on the page you are viewing. Add a new directory entry. Delete all Directory entries. Import a directory file. Export the directory.
VSP735 Administrator and Provisioning Manual To add a new directory entry: 1. Click . The Create Local Directory Entry page appears. 2. Enter the required information as described in the following table. Create Local Directory Entry Setting Description Range Default First Name Enter the appropriate names in these fields. The maximum length of the first name and last name fields is 15 characters. n/a Blank Ringer Tone Sets a unique ringer tone for calls from this directory entry.
VSP735 Administrator and Provisioning Manual Directory Import/Export The best way to create a directory file for import is to first export the directory from the phone. After exporting the file, open it in an .xml editor and add or modify entries. Importing a directory file adds the imported directory entries to existing entries. Therefore, it is possible to have duplicate entries after importing a directory file.
VSP735 Administrator and Provisioning Manual Blacklist On the Blacklist page, you can manage local blacklist entries. The phone rejects calls from numbers that match blacklist entries. You can sort, edit, delete, and add up to 200 blacklist entries. In order to back up your blacklist entries or import another local blacklist file, the page also enables you to export and import your phone’s blacklist. The blacklist lists entries on up to 10 pages, with 20 entries per page.
VSP735 Administrator and Provisioning Manual The following table describes the buttons available on the Blacklist page. Click To… Sort the list by last name. Edit information for an entry View the next page of entries. View the last page of entries. View the first page of entries. Delete selected entries. Click Select All to select every entry on the page you are viewing. Add a new entry. Delete all entries. Import a blacklist file. Export the blacklist. To add a new blacklist entry: 1. Click .
VSP735 Administrator and Provisioning Manual Create Blacklist Entry Setting Description Range Default First Name Enter the appropriate names in these fields. The maximum length of the first name and last name fields is 15 characters. n/a Blank Sets the account used when you dial this directory entry. Default Account, Account 1–5 Account 1 n/a Blank Last Name Account Home Number Work Number Enter the appropriate names and numbers in these fields.
VSP735 Administrator and Provisioning Manual LDAP The phone supports remote Lightweight Directory Access Protocol (LDAP) directories. An LDAP directory is hosted on a remote server and may be the central directory for a large organization spread across several cities, offices, and departments. You can configure the phone to access the directory and allow users to search the directory for names and telephone numbers. The LDAP settings are also available as parameters in the configuration file.
VSP735 Administrator and Provisioning Manual Version Select the LDAP protocol version supported on the phone. Ensure the protocol value matches the version assigned on the LDAP server. Authentication scheme Select the LDAP server authentication scheme. Authentication name Enter the user name or authentication name for LDAP server access. Authentication password Enter the authentication password for LDAP server access. Base Enter the LDAP search base.
VSP735 Administrator and Provisioning Manual Work number attribute Sets the attribute for the work number. What you enter here should match the work number attribute for entries on the LDAP server (telephoneNumber, for example). This helps ensure that the phone displays LDAP entries in the same format as the Local Directory. Mobile number attribute Sets the attribute for the mobile number. What you enter here should match the mobile number attribute for entries on the LDAP server (mobile, for example).
VSP735 Administrator and Provisioning Manual Broadsoft The phone supports access to the Broadsoft Phonebook. Users can search for and call contacts that are hosted on the Broadsoft Phonebook. On the Broadsoft Phonebook page, you must enter the path and credentials to enable the phone to access the Broadsoft Phonebook. Broadsoft Phonebook Setting Description Enable Broadsoft Phonebook Enables or disables the phone’s access to the Broadsoft phonebook.
VSP735 Administrator and Provisioning Manual Call History The Call History page has no configurable settings. It displays Missed Calls, Received Calls, and Dialed Calls. Users can view their call history and “click to dial” numbers if click to dial is enabled.
VSP735 Administrator and Provisioning Manual Servicing Reboot To manually reboot the phone and apply settings that you have updated, click . Time and Date On the Time and Date page, you can manually set the time and date, and the time and date formats. You can also set the system time to follow a Network Time Protocol (NTP) Server (recommended) or you can set the time and date manually. The time and date settings are also available as parameters in the configuration file.
VSP735 Administrator and Provisioning Manual Time and Date Format Click the link for each setting to see the matching configuration file parameter in Appendix A: Configuration File Settings. Default values and ranges are listed there. Setting Description Date Format Sets the date format. Time Format Sets the clock to a 24-hour or 12-hour format. Network Time Settings Setting Description Enable Network Time Enables or disables getting time and date information for your phone from the Internet.
VSP735 Administrator and Provisioning Manual If User-defined DST is enabled, set the end date and time for daylight savings: Month, week, day, and hour. DST End: Month DST End: Week DST End: Day DST End: Hour Daylight Savings Offset If User-defined DST is enabled, this specifies the daylight savings adjustment (in minutes) to be applied when the current time is between Daylight Savings Start and Daylight Savings End.
VSP735 Administrator and Provisioning Manual Firmware Upgrade You can update the phone with new firmware using the following methods: Retrieving a firmware update file from a remote host computer and accessed via a URL. This central location may be arranged by you, an authorized VESA dealer, or your SIP service provider. Enter the URL under Firmware Server Settings. Using a file located on your computer or local network. No connection to the Internet is required.
VSP735 Administrator and Provisioning Manual Manual Firmware Update and Upload On the Manual Firmware Update Settings page, you can upgrade the phone firmware using a file located on your computer or local network. To update the firmware using a file on your computer or local network: 1. On the Manual Firmware Update page, click the firmware update file. 2. Click to locate and open . The phone will update its firmware and restart.
VSP735 Administrator and Provisioning Manual Provisioning Provisioning refers to the process of acquiring and applying new settings for the phone using configuration files retrieved from a remote computer. After a phone is deployed, subsequent provisioning can update the phone with new settings; for example, if your service provider releases new features. See also Provisioning Using Configuration Files on page 77.
VSP735 Administrator and Provisioning Manual Provisioning Settings Setting Description Provisioning server URL of the provisioning file(s). The format of the URL must be RFC 1738 compliant, as follows: “://:@ :/” “:@” may be empty. “” can be omitted if you do not need to specify the port number.
VSP735 Administrator and Provisioning Manual DHCP Settings Use DHCP Options Enables the phone to use DHCP options to locate and retrieve the configuration file. When selected, the phone automatically attempts to get a provisioning server address, and then the configuration file. If DHCP options do not locate a configuration file, then the server provisioning string is checked. NOTE: Ensure that DHCP is also enabled on the Network > Basic settings page.
VSP735 Administrator and Provisioning Manual Resynchronization Setting Description Mode Sets which files the phone checks for at regular intervals. It can check for configuration files, firmware update files (from the URL entered on the Firmware Server Settings page), or both. NOTE: When checking for both config and firmware files, the firmware URL can be within the config file. This firmware URL takes take precedence over the URL on the Firmware Server Settings page.
VSP735 Administrator and Provisioning Manual Import Configuration You can configure the phone by importing a configuration file from your computer or your local network. For more information about configuration file types and configuration file formatting, see Provisioning Using Configuration Files on page 77. To import a configuration file: 1. Click to locate and open the configuration file. . 2. Click The phone will update its configuration.
VSP735 Administrator and Provisioning Manual Reset Configuration You can reset the phone to its default settings. To reset the phone to its default configuration: 1. Under Reset Configuration, click . 2. When the confirmation box appears, click OK.
VSP735 Administrator and Provisioning Manual Security On the Security page you can reset the admin password, reset the user password, and enter web server settings. The security settings are also available as parameters in the configuration file. See “web” Module: Web Settings on page 122. Administrator Password You can set the administrator password on the WebUI or by using provisioning.
VSP735 Administrator and Provisioning Manual Web Server Setting Description HTTP Server port Port used by the HTTP server. Enable Secure Browsing Sets the server to use the HTTPS protocol. HTTPS Server port Port used by the HTTPS server. To configure Web Server Settings: 1. Enter the HTTP Server port number. The default setting is 80. 2. Enable or Disable Secure Browsing. When enabled, the HTTPS protocol is used, and you must select the HTTPS server port in the next step. 3.
VSP735 Administrator and Provisioning Manual System Logs On the Syslog page, you can enter settings related to system logging activities. It supports the following logging modes: Syslog server Volatile file Under Network Trace, you can capture network traffic related to the phone’s activity and save the capture as a .pcap file. The file can be used for diagnostic and troubleshooting purposes. Under Download Log, you can save the system log to a file.
VSP735 Administrator and Provisioning Manual The logging levels are: CRITICAL: Operating conditions to be reported or corrected immediately (for example, an internal component failure or file system error). ERROR: Non-urgent failures—unexpected conditions that won't cause the device to malfunction. WARNING: An indication that an error or critical condition can occur if action is not taken. INFO: Normal operational messages. DEBUG: Developer messages for troubleshooting/debugging purposes.
VSP735 Administrator and Provisioning Manual Provisioning Using Configuration Files Provisioning using configuration files is the quickest way to configure multiple phones. You can place configuration files on a provisioning server, where the phones can retrieve the files and update their configuration automatically. Configuration files have the extension .cfg and contain parameters that define various phone settings. To edit a configuration file, open it with a text editor such as Notepad.
VSP735 Administrator and Provisioning Manual If the provisioning URL specifies a path only with no filename, then by default the phone fetches the following two files: General file: .cfg. MAC-specific file: _.cfg. The variable is the VTech phone model: VSP735, for example. If the provisioning URL specifies both a path and filename, then the phone fetches only the configuration file specified. 3. The phone restarts after one minute of inactivity.
VSP735 Administrator and Provisioning Manual Configuration File Types The phone is able to retrieve and download two types of configuration file. Depending on your requirements, you may want to make both types of configuration file available on your provisioning server. The two configuration file types are a general configuration file and a MAC-specific configuration file. The types differ in name only. The formatting of the files’ content is identical.
VSP735 Administrator and Provisioning Manual Configuration File Guide All configuration settings are initially stored in a configuration template file. Copy, rename, and edit the template file to create a general configuration file and the MACspecific configuration files you will need. You can store the general configuration file and the MAC-specific files on your provisioning server. Do not modify the header line that includes the model and firmware version.
VSP735 Administrator and Provisioning Manual Elements in brackets are examples—do not enter the brackets. Enter a 16-character passphrase and the unencrypted configuration file filename (the “infile”) and a name for the encrypted file (“outfile”) that will result. To enable configuration file decryption: 1. On the WebUI, click Servicing > Provisioning. 2. On the Provisioning page under Resynchronization, select Use Encryption for configuration file. 3.
VSP735 Administrator and Provisioning Manual Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For customer service, visit our website at businessphones.vtech.com or call 1 (888) 370-2006. Screen is blank. Ensure power is connected. If powered by an AC adapter, check that the adapter is plugged into a wall socket and the deskset power jack. If powered by PoE, ensure that the network switch is providing power through the correct ports.
VSP735 Administrator and Provisioning Manual Provisioning: “Use DHCP Option” is enabled, but the phone is not getting a provisioning URL from the DHCP Server. Ensure that DHCP is enabled in Network settings.
VSP735 Administrator and Provisioning Manual Specifications RF frequency band: 1921.536–1928.448 MHz Channels: 5 Operating temperature: 32–122 °F (0–50 °C) AC adapter output voltage: 5.
VSP735 Administrator and Provisioning Manual Soft Keys The table below provides an alphabetical list of the labels that appear above the deskset soft keys.
VSP735 Administrator and Provisioning Manual Edit Edit Dial End Enter Go to entry/group editor Edits a number stored in a list before dialing 1) Closes the current page 2) Ends the current call Confirms input of the admin password FirstNme Sorts the directory by first name Forward Opens the predial editor to begin forwarding a call Hold Puts the active call on hold Info Displays details for a selected call history entry Insert LastNme Inserts a number from the directory or call history to a live
VSP735 Administrator and Provisioning Manual Type Switches between the Directory number types within an entry View Displays a list of missed calls, messages, or a call history folder XferLine Displays a list of held calls as a transfer target for the active call Yes Confirm 87 Soft Keys
VSP735 Administrator and Provisioning Manual Appendix A: Configuration File Settings This section lists the available options for all the settings within the configuration file. Most settings in the configuration file have an equivalent in the WebUI (see the settings tables in Using the WebUI on page 21). However, the options you must enter when editing the configuration file have a different syntax and format. The settings are divided into modules. Each module loosely corresponds to a page on the WebUI.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.inter_digit_timeout Description: Sets the inter-digit timeout (in seconds) for account x. The interdigit timeout sets how long the device waits after the last digit is entered before dialing the number. Values: 1–10 Setting: sip_account.x.maximum_call_number Description: Sets the maximum number of concurrent active calls allowed for that account. Values: 1–6 Setting: sip_account.x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.primary_sip_server_address Description: Sets the SIP server IP address for account x. Values: Text string Setting: sip_account.x.primary_sip_server_port Description: Sets the SIP server port for account x. Values: 1–65535 Setting: sip_account.x.primary_registration_server_address Description: Sets the registration server IP address for account x. Values: Text string Setting: sip_account.x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.primary_outbound_proxy_server_address Description: Sets the outbound proxy server IP address for account x. Values: Text string Setting: sip_account.x.primary_outbound_proxy_server_port Description: Sets the outbound proxy server port for account x. Values: 1–65535 Setting: sip_account.x.backup_outbound_proxy_server_address Description: Sets the backup outbound proxy server IP address for account x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.codec_priority.3 Description: Sets the third highest-priority codec for account x. Values: none, g711u, g711a, g729, g726, g722 Setting: sip_account.x.codec_priority.4 Description: Sets the fourth highest-priority codec for account x. Values: none, g711u, g711a, g729, g726, g722 Setting: sip_account.x.codec_priority.5 Description: Sets the fifth highest-priority codec for account x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.local_sip_port Description: Sets the Local SIP port for account x. Values: 1–65535 Setting: sip_account.x.transport_mode Description: Sets the Signalling Transport Mode for account x. Values: udp, tcp, tls Setting: sip_account.x.access_code_page Description: Sets the paging feature access code for account x. Values: Text string Setting: sip_account.x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.access_code_dnd_on Description: Sets the do not disturb (DND) ON feature access code for account x. Values: Text string Setting: sip_account.x.access_code_dnd_off Description: Sets the do not disturb (DND) OFF feature access code for account x. Values: Text string Setting: sip_account.x.access_code_cfa_on Description: Sets the Call Forward All ON feature access code for account x. Values: Text string Setting: sip_account.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.access_code_cfb_on Description: Sets the Call Forward Busy ON feature access code for account x. Values: Text string Setting: sip_account.x.access_code_cfb_off Description: Sets the Call Forward Busy OFF feature access code for account x. Values: Text string Setting: sip_account.x.access_code_anonymous_call_block_on Description: Sets the Anonymous Call Block ON feature access code for account x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.access_code_call_waiting_on Description: Sets the Call Waiting ON feature access code for account x. Values: Text string Setting: sip_account.x.access_code_call_waiting_off Description: Sets the Call Waiting OFF feature access code for account x. Values: Text string Setting: sip_account.x.access_code_group_call_pickup Description: Sets the Group Call Pickup feature access code for account x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.blf_subscription_expires Description: Sets the BLF subscription expiry time (in seconds) for account x. Values: 0–65535 Setting: sip_account.x.blf_remote_pickup_code Description: Sets the Busy Lamp Field (BLF) remote pickup code for account x. Values: Text string Setting: sip_account.x.mwi_enable Description: Enables or disables message waiting indicator subscription for account x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.nat_traversal_stun_enable Description: Enables or disables STUN (Simple Traversal of UDP through NATs) for account x. STUN enables clients, each behind a firewall, to establish calls via a service provider hosted outside of either local network. Values: 0 (disabled), 1 (enabled) Setting: sip_account.x.nat_traversal_stun_server_address Description: Sets the STUN server IP address. Values: Text string Setting: sip_account.x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.network_conference_enable Description: Enables or disables network conferencing for account x. Values: 0 (disabled), 1 (enabled) Setting: sip_account.x.network_bridge_uri Description: Sets the URI for the network conferencing bridge on account x. Values: Text string (SIP URI) Setting: sip_account.x.sip_session_timer_enable Description: Enables or disables the SIP session timer.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.use_first_trusted_certificate_for_all Description: Enables or disables accepting the first TLS certificate for all accounts. Values: 0 (disabled), 1 (enabled) Default: 0 MAC-Specific Configuration File Settings Setting: sip_account.x.sip_account_enable Description: Enables account x to be used by the device. Specific to the MAC configuration file. Values: 0 (disabled), 1 (enabled) Setting: sip_account.x.
VSP735 Administrator and Provisioning Manual Setting: sip_account.x.authentication_password Description: Sets the authentication password for account x. Specific to the MAC configuration file. Values: Text string Setting: sip_account.x.feature_sync_enable Description: Enables or disables feature synchronization for account x. When enabled, features configured on the service provider’s web portal will automatically be updated on the device’s WebUI. Specific to the MAC configuration file.
VSP735 Administrator and Provisioning Manual “network” Module: Network Settings The network settings follow the format: network.[element]. General Configuration File Settings Setting: network.nat.public_rtp_port_start Description: Sets the public RTP port range start. Values: 1–65535 Setting: network.nat.public_rtp_port_end Description: Sets the public RTP port range end. Values: 1–65535 Setting: network.vlan.wan.enable Description: Enables or disables the WAN VLAN.
VSP735 Administrator and Provisioning Manual Setting: network.vlan.pc.id Description: Sets the PC port VLAN ID. Values: 0–4095 Setting: network.vlan.pc.priority Description: Sets the PC port priority. Values: 0–7 Setting: network.lldp_med.enable Description: Enables or disables LLDP-MED. Values: 0 (disabled), 1 (enabled) Setting: network.lldp_med.interval Description: Sets the LLDP-MED packet interval (in seconds). Values: 1–30 Setting: network.eapol.
VSP735 Administrator and Provisioning Manual Setting: network.eapol.password Description: Sets the 802.1x EAPOL MD5 password. Values: Text string Setting: network.vendor_class_id Description: Sets the vendor ID for DHCP option 60. Values: Text string Setting: network.user_class Description: Sets the user class for DHCP option 77. Values: Text string Default: Default: Default: Blank Vtech Vesa VSP735 Vtech Vesa VSP735 MAC-Specific Configuration File Setting: network.nat.
VSP735 Administrator and Provisioning Manual Setting: network.rtp.port_start Description: Sets the Local RTP port range start. Values: 1–65535 Setting: network.rtp.port_end Description: Sets the Local RTP port range end. Values: 1–65535 Setting: network.ip.dhcp_enable Description: Indicates whether DHCP is enabled. Values: 0 (disabled), 1 (enabled) Setting: network.ip.static_ip_addr Description: Sets a static IP address for the network. Values: Text string (IPv4) Setting: network.
VSP735 Administrator and Provisioning Manual Setting: network.ip.dns1 Description: Sets the primary DNS server IP address. Values: Text string (IPv4) Setting: network.ip.dns2 Description: Sets the secondary DNS server IP address.
VSP735 Administrator and Provisioning Manual “provisioning” Module: Provisioning Settings The provisioning settings follow the format: provisioning.[element]. All these settings are exported when you manually export the configuration from the phone. All the provisioning settings are included in the general configuration file. Setting: provisioning.click_to_dial Description: Enables or disables “click to dial” functionality for directory entries.
VSP735 Administrator and Provisioning Manual Setting: provisioning.server_username Description: Sets the authentication name for the provisioning server. Values: Text string Setting: provisioning.server_password Description: Sets the authentication password for the provisioning server. Values: Text string Setting: provisioning.dhcp_option_enable Description: Enables or disables using DHCP options for locating the configuration and firmware files.
VSP735 Administrator and Provisioning Manual Setting: provisioning.resync_mode Description: Sets the mode of the device’s provisioning/firmware file check. This determines which files the device retrieves when the resync process begins. Values: config_only, firmware_only, config_and_firmware Setting: provisioning.bootup_check_enable Description: Enables or disables bootup check for configuration and firmware files. Values: 0 (disabled), 1 (enabled) Setting: provisioning.
VSP735 Administrator and Provisioning Manual Setting: provisioning.crypto_passphrase Description: Sets the AES encryption passphrase for decrypting the configuration file(s). Enter the key that was generated when you encrypted the file. Values: Text string Setting: provisioning.check_trusted_certificate Description: Enables or disables accepting only a trusted TLS certificate for access to the provisioning server. Values: 0 (disabled), 1 (enabled) Setting: provisioning.
VSP735 Administrator and Provisioning Manual “time_date” Module: Time and Date Settings The time and date settings follow the format: time_date.[element]. All these settings are exported when you manually export the configuration from the phone. All the time and date settings are included in the general configuration file. Setting: time_date.date_format Description: Sets the format for displaying the date. Values: DD/MM/YY, MM/DD/YY, YY/MM/DD Setting: time_date.
VSP735 Administrator and Provisioning Manual Setting: time_date.selected_timezone Description: Sets the local timezone.
VSP735 Administrator and Provisioning Manual Asia/Singapore, Australia/Perth, Asia/Seoul, Asia/Tokyo, Australia/Adelaide, Australia/Darwin, Australia/Sydney, Australia/Brisbane, Australia/Hobart, Asia/Vladivostok, Australia/Lord_Howe, Pacific/Noumea, Pacific/Auckland, Pacific/Chatham, Pacific/Tongatapu Setting: time_date.daylight_saving_auto_adjust Description: Sets the device to automatically adjust clock for daylight savings. Values: 0 (disabled), 1 (enabled) Setting: time_date.
VSP735 Administrator and Provisioning Manual Setting: time_date.daylight_saving_start_hour Description: Sets the hour that daylight savings time starts. Values: 00:00–23:00 Setting: time_date.daylight_saving_end_month Description: Sets the month that daylight savings time ends. Values: January–December Setting: time_date.daylight_saving_end_week Description: Sets the week that daylight savings time ends. Values: 1–5 Setting: time_date.
VSP735 Administrator and Provisioning Manual Setting: time_date.timezone_dhcp_option Description: Enables or disables DHCP option 2/100/101 for determining time zone information. Values: 0 (disabled), 1 (enabled) Setting: time_date.ntp_server_update_interval Description: Sets the delay between NTP server updates, in seconds. Values: 0–4294967295 Default: Default: 0 1000 “log” Module: Log Settings The log settings control system logging activities.
VSP735 Administrator and Provisioning Manual Setting: log.syslog_level Description: Sets the log level. The higher the level, the larger the debug output.
VSP735 Administrator and Provisioning Manual “remoteDir” Module: Remote Directory Settings The remote directory settings follow the format: remoteDir.element. All these settings are exported when you manually export the configuration from the phone. All the remote directory settings are included in the general configuration file. Setting: remoteDir.ldap_enable Description: Enables or disables the phone’s access to the LDAP directory. Values: 0 (disabled), 1 (enabled) Setting: remoteDir.
VSP735 Administrator and Provisioning Manual Setting: remoteDir.ldap_authentication_type Description: Sets the LDAP authentication type. Values: simple, ssl Setting: remoteDir.ldap_user_name Description: Sets the LDAP authentication user name. Values: Text string Setting: remoteDir.ldap_password Description: Sets the LDAP authentication password. Values: Text string Setting: remoteDir.ldap_base Description: Sets the LDAP search base.
VSP735 Administrator and Provisioning Manual Setting: remoteDir.ldap_firstname_filter Description: Sets the LDAP first name attribute filter. Values: Text string Setting: remoteDir.ldap_lastname_filter Description: Sets the LDAP last name attribute filter. Values: Text string Setting: remoteDir.ldap_number_filter Description: Sets the LDAP number filter. Values: Text string Setting: remoteDir.ldap_firstname_attribute Description: Sets the name attributes.
VSP735 Administrator and Provisioning Manual Setting: remoteDir.ldap_work_number_attributes Description: Sets the number attributes. Enter the number attributes that you want the phone to display for each entry returned after an LDAP search. Separate each attribute with a space. For example, telephoneNumber mobile will display the work phone number and mobile phone number for each entry. Values: Text string Setting: remoteDir.
VSP735 Administrator and Provisioning Manual Setting: remoteDir.broadsoft_enable Description: Enables or disables the Broadsoft phonebook. Values: 0 (disabled), 1 (enabled) Setting: remoteDir.broadsoft_display_name Description: Sets the Broadsoft Phonebook display name. Values: Text string Setting: remoteDir.broadsoft_server Description: Sets the Broadsoft Phonebook IP address. Values: Text string Setting: remoteDir.broadsoft_port Description: Sets the Broadsoft Phonebook port.
VSP735 Administrator and Provisioning Manual Setting: remoteDir.ldap_check_certificate Description: Enables or disables accepting only a trusted LDAP certificate. Values: 0 (disabled), 1 (enabled) Setting: remoteDir.broadsoft_check_certificate Description: Enables or disables accepting only a trusted Broadsoft certificate. Values: 0 (disabled), 1 (enabled) Default: Default: 0 0 “web” Module: Web Settings The web settings control the web server IP, port, and security settings.
VSP735 Administrator and Provisioning Manual “user_pref” Module: User Preference Settings The user settings are accessible to the phone user. These settings are useful for initial setup. You may wish to remove these settings from auto-provisioning update files so that users do have their own settings overwritten. The user preference settings follow the format: user_pref.element. All these settings are exported when you manually export the configuration from the phone.
VSP735 Administrator and Provisioning Manual Setting: user_pref.audio_mode Description: Sets the default audio mode. Values: speaker, headset Setting: user_pref.hold_reminder.enable Description: Enables or disables audible hold reminder. Values: 0 (disabled), 1 (enabled) Setting: user_pref.hold_reminder.interval Description: Sets the interval for the audible hold reminder in seconds. Values: 10–300 Setting: user_pref.call_waiting.
VSP735 Administrator and Provisioning Manual Setting: user_pref.lcd_contrast Description: Sets the LCD contrast on the deskset. Values: 1–7 Setting: user_pref.backlight Description: Sets the backlight brightness level. Values: off, low, medium, high Setting: user_pref.idle_backlight Description: Sets the backlight brightness level when the phone is idle. Values: off, low, medium, high Setting: user_pref.
VSP735 Administrator and Provisioning Manual Setting: user_pref.handset_volume Description: Sets the corded handset volume. Values: 1–9 Setting: user_pref.key_beep_enable Description: Enables or disables key beeps on the deskset. Values: 0 (disabled), 1 (enabled) Default: Default: 5 1 “call_settings” Module: Call Settings The call settings configure data related to a user’s call preferences. The data is stored internally at /mnt/flash/CallSettings.xml.
VSP735 Administrator and Provisioning Manual Setting: call_settings.account.x.dnd_incoming_calls Description: Sets whether incoming calls are shown or rejected when DND is on for account x. Values: show, reject Setting: call_settings.account.x.call_fwd_always_enable Description: Enables or disables Call Forward Always for account x. Values: 0 (disabled), 1 (enabled) Setting: call_settings.account.x.call_fwd_always_target Description: Sets the Call Forward Always target number for account x.
VSP735 Administrator and Provisioning Manual Setting: call_settings.account.x.cfna_target Description: Sets the Call Forward No Answer target number for account x. Values: Text string Setting: call_settings.account.x.cfna_delay Description: Sets the Call Forward No Answer delay (in number of rings) for account x. Values: 1–10 Setting: call_settings.missed_call_alert_enable Description: Enables or disables missed call alerts.
VSP735 Administrator and Provisioning Manual “pfk” Module: Programmable Feature Key Settings The programmable feature key (PFK) settings store the data associated with each programmable feature key. The programmable feature key settings follow the format: pfk.x.[element], where x is the programmable feature key ID, ranging from 1 to 32. All the programmable feature key settings are included in the general configuration file. Setting: pfk.x.feature Description: Assigns a feature to PFK x.
VSP735 Administrator and Provisioning Manual Setting: pfk.x.multicast_zone Description: Sets the multicast paging zone if multicast page is assigned to pfk x. Values: 1–10 Setting: pfk.x.account Description: Sets the SIP account used for the assigned feature (if applicable). Values: 1–5 Default: Default: Blank 1 “speed_dial” Module: Speed Dial Settings The speed dial key settings configure the dial pad keys for speed dialing preprogrammed phone numbers.
VSP735 Administrator and Provisioning Manual “ringersetting” Module: Distinctive Ringer Settings The distinctive ringer settings configure the distinctive ringer feature. For more information, see Ringer Settings on page 44. You can configure up to 8 instances of the distinctive ringer feature. The ringer setting parameters follow the format ringersetting.x.[element], where x is the instance of the setting, ranging from 1 to 8. All the ringer settings are included in the general configuration file.
VSP735 Administrator and Provisioning Manual “file” Module: Imported File Settings The “file” parameters enable the provisioning file to import additional configuration files of various types, including: Contact lists Security certificates The following certificates are supported: Per-account TLS certificate (you can choose to use the Account 1 certificate for all accounts) Broadsoft directory LDAP Web server (the phone has a default self-signed web server certificate) Provisioning Language
VSP735 Administrator and Provisioning Manual Setting: file.ldap.trusted.certificate Description: URI of LDAP certificate to be imported, e.g. ://:@:/ Values: Text string Setting: file.broadsoft.trusted.certificate Description: URI of Broadsoft certificate to be imported, e.g. ://:@:/ Values: Text string Default: Default: Blank Blank MAC-Specific Configuration File Settings Setting: file.contact.
VSP735 Administrator and Provisioning Manual “tone” Module: Tone Definition Settings The Tone Definition settings configure data for various tones for the purpose of localization. The Audio Manager component uses the data from this model to populate the mcu on bootup.
VSP735 Administrator and Provisioning Manual Setting: tone.hold_reminder_tone.num_of_elements Description: Sets the number of tone elements for the hold reminder tone. Values: 1–5 Setting: tone.hold_reminder_tone.element.1 Description: Defines the hold reminder tone element 1. Values: Tone element string Setting: tone.hold_reminder_tone.element.x Description: Defines the hold reminder tone element x. Values: Tone element string Setting: tone.inside_dial_tone.
VSP735 Administrator and Provisioning Manual Setting: tone.stutter_dial_tone.num_of_elements Description: Sets the number of tone elements for the stutter dial tone. Values: 1–5 Setting: tone.stutter_dial_dial_tone.element.1 Description: Defines the stutter dial tone element 1. Values: Tone element string Setting: tone.stutter_dial_dial_tone.element.2 Description: Defines the stutter dial tone element 2. Values: Tone element string Setting: tone.stutter_dial_tone.element.
VSP735 Administrator and Provisioning Manual Setting: tone.busy_tone.element.x Description: Defines the busy tone element x. Values: Tone element string Setting: tone.ring_back_tone.num_of_elements Description: Sets the number of tone elements for the ringback tone. Values: 1–5 Setting: tone.ring_back_tone.element.1 Description: Defines the ringback tone element 1. Values: Tone element string Setting: tone.busy_tone.element.x Description: Defines the busy tone element x.
VSP735 Administrator and Provisioning Manual “profile” Module: Password Settings The password settings allow you to set the default administrator and user passwords in the configuration file. The administrator password is usually included in the general configuration file, while the user password is usually included in the devicespecific configuration file. The passwords can also be set using the WebUI. Be aware that scheduled provisioning configuration file updates may reset these passwords.
VSP735 Administrator and Provisioning Manual Setting: page_zone.x.multicast_address Description: Enter the multicast IP address that the deskset will monitor. The range of valid IP addresses is 224.0.0.0 to 239.255.255.255. Values: IPv4 IP address Setting: page_zone.x.multicast_port Description: Enter the multicast port associated with the multicast IP. The range of valid ports is 1 to 65535. Values: 1–65535 Setting: page_zone.x.
VSP735 Administrator and Provisioning Manual Maintenance Taking care of your telephone Your telephone contains sophisticated electronic parts, so you must treat it with care. Avoid rough treatment. Place the corded handset down gently. Save the original packing materials to protect your telephone base if you ever need to ship it. Avoid water You can damage your telephone if it gets wet. Do not use the corded handset in the rain, or handle it with wet hands.
VSP735 Administrator and Provisioning Manual Important Safety Information This symbol is to alert you to important operating or servicing instructions that may appear in this user’s manual. Always follow basic safety precautions when using this product to reduce the risk of injury, fire, or electric shock. Safety Information Read and understand all instructions in the user’s manual. Observe all markings on the product. Avoid using a telephone during a thunderstorm.
VSP735 Administrator and Provisioning Manual Industry Canada Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation. The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications.
VSP735 Administrator and Provisioning Manual FCC part 15 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
VSP735 Administrator and Provisioning Manual GPL License Information Portions of the software associated with this product are open source, and fall within the scope of the GNU General Public License (GPL). Accordingly, those portions of code are available to the public, consistent with the requirements of the GPL, in either source code format or object code format, depending upon the nature of the code at issue.
