Specifications

VSP600/VSP601 Administrator and Provisioning Manual
50 WebUI: Servicing
Firmware Upgrade
You can update the base station with new firmware using the following methods:
 Retrieving a firmware update file from a remote host computer and accessed
via a URL. This central location may be arranged by you, an authorized
ErisTerminal dealer, or your SIP service provider. Enter the URL under
Firmware Server Settings.
 Using a file located on your computer or local network. No connection to the
Internet is required. Consult your dealer for access to firmware update files.
Click Manual Upgrade to view the page where you can manually upgrade the
base station firmware.
The firmware upgrade settings are also available as parameters in the configuration
file. See “provisioning” Module: Provisioning Settings on page 85.
Firmware Server Settings
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and
ranges are listed there.
Setting Description
Base Firmware URL The URL where the VSP600 Base Station firmware
update file resides. This should be a full path,
including the filename of the firmware file.
Handset Firmware URL The URL where the VSP601 Handset firmware
update file resides. This should be a full path,
including the filename of the firmware file.
Server authentication name Authentication username for the firmware server
Server authentication password Authentication password for the firmware server
To update the firmware immediately:
1. Click
or .
NOTE: You can also configure the base station to check for firmware updates at
regular intervals. See Provisioning on page 52.