Specifications

VSP600/VSP601 Administrator and Provisioning Manual
15 Using the Handset Menu
BACK OK
0.0.0.0
Set static IP
Subnet Mask:
0.0.0.0
IP Address:
3. Press  and enter the Subnet Mask. Use the dial pad to enter characters.
4. Press  and enter the Gateway. Use the dial pad to enter characters.
5. Press OK .
To set the VLAN ID for the base station:
1. From the Network setting menu, press  or  to highlight VLAN ID, and then
press MENU/SELECT.
2. On the VLAN ID menu, press MENU/SELECT to enable or disable the WAN VLan.
BACK ENTER
0
VLAN ID
Port:
Disabled
VLAN:
3. Press  and enter the WAN port number. Use the dial pad and the BACKSP soft
key to enter characters. The valid range is 0 to 4095.
4. Press SAVE.
To turn on secure browsing:
1. From the Network setting menu, press  or  to highlight Secure browsing,
and then press MENU/SELECT.
2. On the Secure browsing menu, press MENU/SELECT to enable or disable HTTPS.
BACK ENTER
Secure browsing
Disabled
HTTPs:
To set other settings (DNS and NTP):
1. From the Network setting menu, press  or  to highlight Others, and then
press MENU/SELECT.
The Others menu appears. If DHCP is enabled, an error message appears briefly
before returning you to the Network setting menu.