Specifications

VSP600/VSP601 Administrator and Provisioning Manual
11 Using the Handset Menu
Status
Use the status menu to verify network settings and begin troubleshooting if network
problems or account registration issues affect operation.
You can also find the software version of the handset and base station on the
Product Info screen, which is available from the Status menu.
To view the Status menu:
1. When the handset is idle, press MENU/SELECT.
2. On the Main menu, press  or  to highlight Status, then press
MENU/SELECT. The Status menu appears.
BACK ENTER
Status
Product info
Line
Network
3. On the Status menu, press  or  to highlight the desired menu, then press
MENU/SELECT.
The available status menus are listed in the following table.
Menu Information listed
Network
 IP address
 DHCP status (Enabled/Disabled)
 Subnet Mask
 Gateway IP address
 DNS server 1 IP address
 DNS server 2 IP address
Line Lines and registration status. On the Line menu, highlight and
select the desired line to view detailed line status information:
 Line status (Registered/Not registered)
 Account display name
 Account User ID
 Registrar Server IP address
Product info Shows the product info for the handset or base station. Select
Handset or Base to view the:
 Model number (Handset only)
 Serial number (Handset only)
 Software version
 V-Series
 Hardware version