Specifications

VSP600/VSP601 Administrator and Provisioning Manual
45 WebUI: Servicing
Vendor Class ID (DHCP 60)
DHCP Option 60 is available to send vendor-specific
information to the DHCP Server.
User Class Info (DHCP 77) DHCP Option 77 is available to send vendor-specific
information to the DHCP Server.
Resynchronization
Setting Description
Mode Sets which files the base station checks for at regular intervals. It
can check for configuration files, firmware update files (from the
URL entered on the Firmware Server Settings page), or both.
NOTE: When checking for both config and firmware files, the
firmware URL can be within the config file. This firmware URL takes
take precedence over the URL on the Firmware Server Settings
page. It will also update the URL on the Firmware Server Settings
page. This allows you to change the firmware URL automatically.
Bootup Check Sets the base station to check the provisioning URL for new
configuration and/or firmware files upon bootup. The update is
applied as part of the reboot process.
Interval Sets an interval, in minutes, for checking for updates.
Use encryption Enables an AES-encrypted configuration file to be decrypted before
being applied to the base station. Select if the configuration file
has been secured using AES encryption. See Securing
C
onfiguration Files with AES Encryption on page 56.