Specifications

VSP600/VSP601 Administrator and Provisioning Manual
39 WebUI: Servicing
Network Time Settings
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and
ranges are listed there.
Setting Description
Enable Network Time Enables or disables getting time and date information for the
base station from the Internet.
NTP Server If Enable Network Time is selected, enter the URL of your
preferred time server.
Use DHCP (Option 42) If Enable Network Time is selected, select to use DHCP to
locate the time server. Option 42 specifies the NTP server
available to the base station. When enabled, the base station
obtains the time in the following priority: 1. Option 42 2. NTP
Server 3. Manual time.
Time Zone and Daylight Savings Time Settings
Setting Description
Time Zone Select your time zone from the list.
Automatically adjust
clock for Daylight
Savings
Select to adjust the clock for daylight savings time according
to the NTP server and time zone setting. To disable daylight
savings adjustment, disable both this setting and User-
defined Daylight Savings Time.
User-defined DST Select to set your own start and end dates and offset for
Daylight Savings time. To disable daylight savings
adjustment, disable both this setting and Automatically
adjust clock for Daylight Savings.
DST Start: Month
DST Start: Week
DST Start: Day
DST Start: Hour
If User-defined DST
is enabled, set the start date and time
for daylight savings: Month, week, day, and hour.
DST End: Month
DST End: Week
DST End: Day
DST End: Hour
If User-defined DST
is enabled, set the end date and time for
daylight savings: Month, week, day, and hour.