Specifications

VSP600/VSP601 Administrator and Provisioning Manual
29 WebUI: Network
Advanced Network Settings
VLAN
You can organize your network and optimize VoIP performance by creating a virtual
LAN for base stations and related devices.
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and
ranges are listed there.
Setting Description
Enable LAN Port VLAN Enable if the base station is part of a VLAN on your network.
Select to enable.
VID Enter the VLAN ID (vlan 5, for example).
Priority Select the VLAN priority that matches the Quality of Service
(QOS) settings that you have set for that VLAN ID. Outbound
SIP packets will be marked and sent according to their priority. 7
is the highest priority. NOTE: Configuring QOS settings for your
router or switch is a subject outside the scope of this document.
LLDP-MED
Setting Description
Enable LLDP-MED Enables or disables Link Layer Discovery Protocol for Media
Endpoint Devices (LLDP-MED). LLDP-MED is a standards-based
discovery protocol supported on some network switches. It is
required for auto-configuration with VLAN settings.
Packet Interval (secs) Sets the LLDP-MED packet interval (in seconds).