Specifications

VSP600/VSP601 Administrator and Provisioning Manual
25 WebUI: System
Signaling Settings
The signalling settings are also available as parameters in the configuration file. See
“network” Module: Network Settings on page 71.
Af
ter entering information on this page, click
to save it.
Voice
Click the link for each setting to see the matching configuration file parameter in
Appendix A: Configuration File Settings. Default values and
ranges are listed there.
Setting Description
Min Local RTP port Enter the lower limit of the Real-time Transport Protocol
(RTP) port range. RTP ports specify the minimum and
maximum port values that the base station will use for RTP
packets.
Max Local RTP port Enter the upper limit of the RTP port range.
NAT Traversal
The NAT Traversal settings are communicated to the VoIP server so that the base
station is reachable when connected to the Internet behind NAT.
Setting Description
Enable IP Masquerading Select to enable NAT traversal and IP masquerading.
Public IP address Enter the external IP address of your router. This setting
identifies the router’s public address to the VoIP server.