Quick Start Manual
9
Base Station Installation
This section assumes that your network infrastructure is established and that your
IP PBX phone service has been ordered and congured for your location. For more
information about IP PBX conguration, see the VSP600/VSP601 Administrator and
Provisioning Manual, available at
businessphones.vtech.com.
You can power the base station using the supplied power adapter or using Power
over Ethernet (PoE) from your network. (The base station requires PoE Class 3.) If
you are not using PoE, install the base station near a power outlet not controlled by a
wall switch. The base station can be placed on a at surface or mounted on a wall in a
vertical or horizontal orientation.
Avoid placing the base station too close to:
• Communication devices such as television sets, DVD players, or other cordless
telephones
• Excessive heat sources
• Noise sources such as a window with trafc outside, motors, microwave ovens,
refrigerators, or uorescent lighting
• Excessive dust sources such as a workshop or garage
• Excessive moisture
• Extremely low temperature
• Mechanical vibration or shock such as on top of a washing machine or work bench