Quick Start Manual

Handset Installation

This section assumes that your network infrastructure is established and that your

IP PBX phone service has been ordered and congured for your location. For more

information about IP PBX conguration, see the VSP600/VSP601 Administrator and

Provisioning Manual, available at

businessphones.vtech.com.

Handset installation involves both the the handset and the handset charger. The charger

is powered using the supplied power adapter. The charger can be placed on a at

surface or mounted on a wall.

Avoid placing the handset and charger too close to:

• Communication devices such as television sets, DVD players, or other cordless

telephones

• Excessive heat sources

• Noise sources such as a window with trafc outside, motors, microwave ovens,

refrigerators, or uorescent lighting

• Excessive dust sources such as a workshop or garage

• Excessive moisture

• Extremely low temperature

• Mechanical vibration or shock such as on top of a washing machine or work bench

Installing the charger

Install the charger as shown below.

Plug the power adapter into an electrical outlet not controlled by a wall switch.