User Guide

38
39
time. If another handset tries to enter
the phonebook, caller ID log or call
block list, it shows Not available.
Dial a caller ID log entry
1. Search for the desired entry in the
caller ID log (see Review the caller ID
log).
2. When the desired entry is displayed
and is in the correct format for dialing:
• Press
or on the handset
to dial with the home line. - OR -
• Press
on the handset to dial
with the cell line.
Delete caller ID log entries
1. Search for the desired entry in the
caller ID log (see Review the caller ID
log).
2. When the desired entry is displayed,
press MUTE/DELETE on the handset.
You hear a confirmation tone.
To delete all entries
1. Press MENU/SELECT on the handset
in idle mode.
2. Press
p/q to highlight Caller ID log,
then press MENU/SELECT.
3. Press
p/q to highlight Delete all,
then press MENU/SELECT.
4. When the screen shows Delete all? or
Delete all calls? , press MENU/SELECT
to confirm.
• There is a confirmation tone and
the screen returns to the previous
menu.
Caller ID memory match
If the incoming telephone number
matches the last 7 digits of a telephone
number in your phonebook, the name
that appears on the screen matches the
corresponding name in your phonebook.
For example, if Christine Smith calls, her
name appears as Chris if this is how you
entered it into your phonebook.
NOTE
• The number you see on your caller ID
is in the format sent by the telephone
service provider. It usually delivers
10-digit telephone numbers (area
code plus telephone number). If the
last 7 digits of the incoming telephone
number do not match a number in
your phonebook, the name appears
as it is delivered by the telephone
service provider.
Missed call indicator
When a cordless handset or the
telephone base is in idle mode and has
new or missed calls, its screen shows XX
Missed calls.
All new and missed entries are counted
as missed calls. Each time you review a
new caller ID log entry (indicated by
NEW on the screen), the missed calls
message goes away. When there is a
new unanswered call, the missed calls
message displays again. The number
of missed calls includes all new
and missed entries that have not been
reviewed.
If you do not want to review the missed
calls one by one, but still want to keep
them in the caller ID log, you can press
and hold
on the handset for four
seconds when the handset is idle.
• You will hear a confirmation tone.
• All the entries in the caller ID log
become old (reviewed already).
• Missed calls message disappears.
Bluetooth
Add a Bluetooth cell phone
Before you begin, make sure that
you have cellular coverage and your
Bluetooth enabled cell phone is not
connected to any other Bluetooth
device. Refer to your cell phone user’s
manual to learn how to search for or
add new Bluetooth devices.
Pair and connect a cell phone
1. Choose a slot to pair the cell phone.
Press and hold
or on the
telephone base for about four
seconds until the or light
flashes.
• If there is already a cell phone in
the slot, the existing cell phone
will be erased from cell devices
list.
2. Turn on the Bluetooth feature of
your cell phone and search for or
add new devices.
Once your cell phone finds your
VTech phone ( VTech DECT 6.0 ),
press the appropriate key on your
cell phone to continue the pairing
process.
• Your cell phone may prompt you
to enter the PIN of the telephone
base. The default PIN of the
telephone base is 0000.
• All cell phones that are
connected to the telephone
base are disconnected
temporarily until the pairing
process is complete.
When a device is successfully paired
and connected, the corresponding
status icon (
or ) displays. The
corresponding device light on the
telephone base ( or ) turns on.
NOTES
• The pairing process may take up to
one minute. If the pairing process
fails, try again.
• The steps for the pairing process